Arkharinsky District fire, 15 October 2022 Arkharinsky District
The fire started on 15 October 2022 in Arkharinsky District, Russia, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 15,683 hectares from heat detections, spread across a single municipality.
It is the 97th largest in Amur Oblast since 2016 (of 535 with a page). Number 47 in Russia in 2022, of 400.
Compare with…
- Burnt area
- 15,683ha
- GWIS perimeter (Copernicus)
- Duration
- 6days
- 15 Oct 2022 – 20 Oct 2022
- Municipalities hit
- 1
- districts
- Started on
- 15 Oct
- 2022
- Heat detections
- 855
- in a single hotspot: 377 MW
- Danger at start
- 13
- Moderate · FWI index
- Average daily power
- 2.0GW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 11 days without rain (1 mm or more) when it started. Rain came after the fire: 3.6 mm on 21 Oct.
This area had burned before
53% of the perimeter overlaps earlier fires recorded since 2016: 767 ha in 2016, 284 ha in 2017, 4,507 ha in 2018, 541 ha in 2019, 1,227 ha in 2020, 2,619 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 8,271 ha that had burned before.
- 4,221 ha Arkharinsky District fire, April 2018 56,083 ha in total; the hectares shown are those it shares with this fire
- 287 ha Arkharinsky District fire, April 2018 11,039 ha in total; the hectares shown are those it shares with this fire
- 171 ha Arkharinsky District fire, October 2016 4,773 ha in total; the hectares shown are those it shares with this fire
- 16 ha Arkharinsky District fire, March 2021 3,183 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Moscow boundary: geoBoundaries · OpenStreetMap, Wambacher · © OpenStreetMap contributors (ODbL 1.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Arkharinsky District where it started15,494 ha reached on 15 Oct1.1 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 15 Oct | 16.9 °C | 30 % | 32 km/h | 0.0 mm | Moderate 13 |
| 16 Oct | 9.5 °C | 27 % | 42 km/h | 0.0 mm | Moderate 14 |
| 17 Oct | 6.2 °C | 54 % | 41 km/h | 0.4 mm | Low 10 |
| 18 Oct | 8.1 °C | 35 % | 43 km/h | 0.0 mm | Low 9 |
| 19 Oct | 13.7 °C | 22 % | 27 km/h | 0.0 mm | Low 10 |
| 20 Oct | 13.4 °C | 22 % | 34 km/h | 0.0 mm | Moderate 12 |
| 21 Oct after | 6.9 °C | 54 % | 30 km/h | 3.6 mm | Very low 1 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 21 October 2022 the air beside the fire reached 792 µg/m³ of PM2.5. That day averaged 189: 13 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 855Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 6,831 haArkharinsky District12 October 2022 · 4 days · 19 km away
- 56,083 haArkharinsky District15 April 2018 · 18 days · 23 km away
- 9,302 haArkharinsky District2 May 2024 · 7 days · 24 km away
- 11,039 haArkharinsky District4 April 2018 · 4 days · 27 km away
- 7,124 haArkharinsky District29 April 2026 · 2 days · 29 km away
- 10,538 haArkharinsky DistrictMay 2026 · 3 days · 30 km away
Frequently asked questions
- How long did the Arkharinsky District fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 15 October 2022 to 20 October 2022 (6 days). The perimeter dates it from 17 October 2022 to 20 October 2022.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 15,683 hectares (156.8 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Arkharinsky District (15,494 ha, 1.1 %).
- What was the weather like?
- During the fire the temperature reached 16.9 °C, humidity dropped to 22 % and gusts hit 43 km/h. The fire danger index (FWI) reached 14, class Moderate.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 112 · Emergency number and official warnings ›
Satellite cross-check
History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
- Start date: 17 October 2022 → 15 October 2022.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 17 October 2022 to 20 October 2022. 855 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.