Arienzo fire, August 2024 Arienzo, San Felice a Cancello, Roccarainola
The fire started on 4 August 2024 in Arienzo, Italy, and satellites saw it burning for 2 days. Copernicus mapped a burnt perimeter of 175 hectares from satellite imagery, spread across 4 municipalities.
It is the 26th largest in Caserta since 2016 (of 69 with a page). Number 54 in Italy in 2024, of 112.
The power measured by the satellite is low (8.2 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
- Burnt area
- 175ha
- Copernicus perimeter
- Duration
- 2days
- 4 Aug 2024 – 5 Aug 2024
- Municipalities hit
- 4
- municipalities
- Started on
- 4 Aug
- 2024
- Heat detections
- 9
- in a single hotspot: 8 MW
- Danger at start
- 29
- High · FWI index
- Energy released
- 25MW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 10 days without rain (1 mm or more) when it started.
This area had burned before
82% of the perimeter overlaps earlier fires recorded since 2016: 10 ha in 2017, 30 ha in 2019, 75 ha in 2020, 108 ha in 2021, 28 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 144 ha that had burned before.
What happened to each town
-
127 ha reached on 4 Aug9.2 %
-
San Felice a Cancello 16,842 inhabitants · 1.0 km from the town39 ha1.4 %
-
Roccarainola 6,564 inhabitants · 5.6 km from the town8 ha0.3 %
-
Forchia 1,217 inhabitants · 1.4 km from the town1 ha0.2 %
Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
What burned
- Other natural land67 %
- Scrub and transitional woodland22 %
- Broadleaved forest6.2 %
- Agricultural areas4.6 %
Natura 2000 protected area affected: 70 %
- LIC Dorsale dei Monti del Partenio IT8040006
Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.
Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 4 Aug | 33.5 °C | 36 % | 27 km/h | 0.0 mm | High 29 |
| 5 Aug | 33.1 °C | 30 % | 26 km/h | 0.0 mm | High 29 |
| 6 Aug after | 32.2 °C | 36 % | 29 km/h | 0.0 mm | High 30 |
| 7 Aug after | 32.8 °C | 37 % | 33 km/h | 0.2 mm | High 31 |
| 8 Aug after | 32.5 °C | 38 % | 34 km/h | 0.1 mm | High 31 |
| 9 Aug after | 32.3 °C | 43 % | 27 km/h | 0.9 mm | Moderate 19 |
| 10 Aug after | 34.8 °C | 26 % | 29 km/h | 0.0 mm | High 30 |
| 11 Aug after | 34.9 °C | 27 % | 31 km/h | 0.0 mm | High 33 |
| 12 Aug after | 34.4 °C | 26 % | 37 km/h | 0.0 mm | High 35 |
| 13 Aug after | 33.0 °C | 41 % | 35 km/h | 0.0 mm | High 30 |
| 14 Aug after | 32.8 °C | 36 % | 37 km/h | 0.0 mm | High 31 |
| 15 Aug after | 34.1 °C | 33 % | 41 km/h | 0.1 mm | High 32 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 7 August 2024 the air beside the fire reached 15 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 9Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Arienzo fire last?
- Copernicus dates it between 4 August 2024 and 5 August 2024: 2 days between the first and last image with fire.
- How much area did it burn?
- The perimeter Copernicus measured from satellite imagery is 175 hectares (1.8 km²). Official national figures may differ.
- Which municipalities burned?
- The fire entered 4 municipalities: Arienzo (127 ha, 9.2 %); San Felice a Cancello (39 ha, 1.4 %); Roccarainola (8 ha, 0.3 %); Forchia (1 ha, 0.2 %).
- Did the fire reach a town?
- The closest fire to a town centre came within 0.9 km of Arienzo. That is the distance to the perimeter or nearest hotspot; it does not mean it entered the houses.
- What was the weather like?
- During the fire the temperature reached 33.5 °C, humidity dropped to 30 % and gusts hit 27 km/h. The fire danger index (FWI) reached 29, class High.
- Where does this data come from?
- From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Italy (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 112 · 1515
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM4 (Creative Commons Attribution 3.0 License). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.