How long did the Arette fire last?

Copernicus dates it between 15 February 2019 and 15 February 2019: 1 day between the first and last image with fire.

How much area did it burn?

The perimeter Copernicus measured from satellite imagery is 123 hectares (1.2 km²). Official national figures may differ.

Which municipalities burned?

The fire only entered Arette (123 ha, 1.3 %).

Did the fire reach a town?

The closest fire to a town centre came within 3.9 km of Arette. That is the distance to the perimeter or nearest hotspot; it does not mean it entered the houses.

What was the weather like?

During the fire the temperature reached 15.9 °C, humidity dropped to 30 % and gusts hit 31 km/h. The fire danger index (FWI) reached 2, class Very low.

Where does this data come from?

From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of France (geoBoundaries). It is not an official report.

FR · France · 2019-02-15 → 2019-02-15

Arette fire, 15 February 2019 Arette

Out · last detection 15 Feb 2019, 13:48 UTC

The fire started on 15 February 2019 in Arette, France, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 123 hectares from satellite imagery, spread across a single municipality.

This record is most likely a pastoral burn (écobuage) in the Pyrenees, not a forest fire. In winter, grassland and scrub are burnt to renew the pasture, and this fire does not appear in France's official forest fire database (BDIFF). That is why it is left out of the fire rankings.

The power measured by the satellite is low (15.4 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area: 123ha; Copernicus perimeter
Duration: 1day; 15 Feb 2019 – 15 Feb 2019
Municipalities hit: 1; communes
Started on: 15 Feb; 2019
Heat detections: 8; in a single hotspot: 15 MW
Danger at start: 2; Very low · FWI index
Energy released: 76MW; sum of detected power

HOTSPOTS BY DAY 15 Feb15 Feb

How it evolved, day by day

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

16°high

31km/h · peak gust

30%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each town

Arette 1,032 inhabitants · 3.9 km from the town where it started

123 ha reached on 15 Feb

1.3 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

Other natural land75 %
Broadleaved forest25 %

Natura 2000 protected area affected: 100 %

ZEPA Haute Soule : massif de la Pierre Saint-Martin FR7212008
LIC Le Gave d'Oloron (cours d'eau) et marais de Labastide-Villefranche FR7200791
LIC Montagnes du Barétous FR7200749

Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day	High	Min. humidity	Peak gust	Danger (FWI)
15 Feb	15.9 °C	30 %	31 km/h	Very low 2
16 Feb after	17.0 °C	25 %	49 km/h	Very low 4
17 Feb after	17.2 °C	24 %	50 km/h	Low 6
18 Feb after	14.1 °C	41 %	42 km/h	Very low 5
19 Feb after	12.5 °C	49 %	17 km/h	Very low 3
20 Feb after	14.0 °C	50 %	24 km/h	Very low 4
21 Feb after	16.1 °C	48 %	22 km/h	Very low 4
22 Feb after	16.1 °C	42 %	25 km/h	Very low 4
23 Feb after	16.1 °C	44 %	30 km/h	Very low 4
24 Feb after	17.4 °C	49 %	25 km/h	Very low 4
25 Feb after	17.8 °C	47 %	23 km/h	Very low 4

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

↔

Before · 8 Feb 2019

After · 22 Feb 2019

Before After

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 15 February 2019 the air beside the fire reached 15 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak15 µg/m³

Days over the guideline0 days

PM1031 µg/m³

131415161718

Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 8Every satellite heat detection, one by one, with time, satellite, power and coordinates.

⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.

Date and time	Satellite	FRP (MW)	Lat	Lon

Other fires nearby

All fires in France ›

Frequently asked questions

How long did the Arette fire last?: Copernicus dates it between 15 February 2019 and 15 February 2019: 1 day between the first and last image with fire.
How much area did it burn?: The perimeter Copernicus measured from satellite imagery is 123 hectares (1.2 km²). Official national figures may differ.
Which municipalities burned?: The fire only entered Arette (123 ha, 1.3 %).
Did the fire reach a town?: The closest fire to a town centre came within 3.9 km of Arette. That is the distance to the perimeter or nearest hotspot; it does not mean it entered the houses.
What was the weather like?: During the fire the temperature reached 15.9 °C, humidity dropped to 30 % and gusts hit 31 km/h. The fire danger index (FWI) reached 2, class Very low.
Where does this data come from?: From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of France (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · 18

Sécurité civile ↗

Satellite cross-check

NASA FIRMS ↗
EFFIS · Copernicus ↗

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error

What do you think is wrong?

Dates or duration Place or towns Burned area Name It was not a wildfire Same fire as another page Something else

What really happened?

Your connection to the fire (optional) Email (optional)

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112 · 18.

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM5 (Open Data Commons Attribution License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.

Where it burned