Anka fire, 28 November 2025 Anka
The fire started on 28 November 2025 in Anka, Nigeria, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,176 hectares from heat detections, spread across a single municipality.
It is the 12th largest in Zamfara since 2016 (of 209 with a page). Number 27 in Nigeria in 2025, of 294.
The power measured by the satellite is low (27.0 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
Compare with…
Suggestions: Anka · 2021Anka · 2021Anka · 2017Anka · 2017
- Burnt area
- 8,176ha
- GWIS perimeter (Copernicus)
- Duration
- 12days
- 28 Nov 2025 – 9 Dec 2025
- Municipalities hit
- 1
- local government areas
- Started on
- 28 Nov
- 2025
- Heat detections
- 191
- in a single hotspot: 27 MW
- Danger at start
- 46
- Very high · FWI index
- Average daily power
- 62MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 48 days without rain (1 mm or more) when it started.
This area had burned before
94% of the perimeter overlaps earlier fires recorded since 2016: 3,560 ha in 2016, 5,164 ha in 2017, 640 ha in 2018, 2,960 ha in 2019, 770 ha in 2020, 6,271 ha in 2021, 1,635 ha in 2022, 1,254 ha in 2023, 2,864 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 7,697 ha that had burned before.
- 3,160 ha Anka fire, November 2021 3,293 ha in total; the hectares shown are those it shares with this fire
- 2,500 ha Anka fire, January 2021 5,829 ha in total; the hectares shown are those it shares with this fire
- 1,858 ha Anka fire, November 2017 2,010 ha in total; the hectares shown are those it shares with this fire
- 1,530 ha Anka fire, January 2017 4,556 ha in total; the hectares shown are those it shares with this fire
- 1,233 ha Anka fire, February 2016 4,301 ha in total; the hectares shown are those it shares with this fire
- 1,157 ha Anka fire, December 2024 2,646 ha in total; the hectares shown are those it shares with this fire
- 739 ha Anka fire, December 2020 3,239 ha in total; the hectares shown are those it shares with this fire
- 640 ha Anka fire, December 2018 4,680 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Anka where it started8,222 ha reached on 24 Nov3.2 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2025Inside the perimeter there were about 0.63 hectares of built-up land and about 200 residents (GHSL 2025, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 28 Nov | 36.5 °C | 23 % | 37 km/h | 0.0 mm | Very high 46 |
| 29 Nov | 36.8 °C | 21 % | 36 km/h | 0.0 mm | Very high 46 |
| 30 Nov | 35.4 °C | 21 % | 41 km/h | 0.0 mm | Very high 48 |
| 1 Dec | 34.9 °C | 21 % | 37 km/h | 0.0 mm | Very high 48 |
| 2 Dec | 33.7 °C | 28 % | 24 km/h | 0.0 mm | High 37 |
| 3 Dec | 35.1 °C | 24 % | 21 km/h | 0.0 mm | High 36 |
| 4 Dec | 34.3 °C | 27 % | 18 km/h | 0.0 mm | High 36 |
| 5 Dec | 35.3 °C | 26 % | 25 km/h | 0.0 mm | High 38 |
| 6 Dec | 34.0 °C | 27 % | 33 km/h | 0.0 mm | Very high 42 |
| 7 Dec | 32.2 °C | 23 % | 35 km/h | 0.0 mm | Very high 44 |
| 8 Dec | 31.4 °C | 25 % | 35 km/h | 0.0 mm | Very high 44 |
| 9 Dec | 31.9 °C | 27 % | 38 km/h | 0.0 mm | Very high 45 |
| 10 Dec after | 31.5 °C | 25 % | 32 km/h | 0.0 mm | Very high 42 |
| 11 Dec after | 32.8 °C | 25 % | 30 km/h | 0.0 mm | Very high 40 |
| 12 Dec after | 34.2 °C | 23 % | 26 km/h | 0.0 mm | Very high 40 |
| 13 Dec after | 34.8 °C | 27 % | 31 km/h | 0.0 mm | Very high 41 |
| 14 Dec after | 33.8 °C | 25 % | 45 km/h | 0.0 mm | Very high 49 |
| 15 Dec after | 32.4 °C | 24 % | 42 km/h | 0.0 mm | Very high 50 |
| 16 Dec after | 32.2 °C | 23 % | 43 km/h | 0.0 mm | Extreme 50 |
| 17 Dec after | 31.3 °C | 25 % | 41 km/h | 0.0 mm | Very high 48 |
| 18 Dec after | 33.9 °C | 25 % | 32 km/h | 0.0 mm | Very high 43 |
| 19 Dec after | 33.4 °C | 28 % | 28 km/h | 0.0 mm | Very high 42 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 9 December 2025 the air beside the fire reached 240 µg/m³ of PM2.5. That day averaged 187: 12 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 191Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 5,829 haAnka13 January 2021 · 7 days · 4 km away
- 5,682 haMaru18 November 2021 · 9 days · 18 km away
- 8,735 haMaru26 November 2016 · 9 days · 26 km away
- 43,149 haMaru12 December 2016 · 26 days · 31 km away
- 14,869 haMaru27 November 2016 · 20 days · 31 km away
- 9,573 haMaruNovember 2017 · 12 days · 33 km away
Frequently asked questions
- How long did the Anka fire last?
- GWIS (Copernicus) dates it between 28 November 2025 and 9 December 2025: 12 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,176 hectares (81.8 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Anka (8,222 ha, 3.2 %).
- What was the weather like?
- During the fire the temperature reached 36.8 °C, humidity dropped to 21 % and gusts hit 41 km/h. The fire danger index (FWI) reached 48, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Nigeria (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 112 · Emergency number and official warnings ›
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 191 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.