Skip to content
worldfires
US · United States · –

Anderson Creek Fire, March 2016 Barber, Woods, Comanche

Out · last detection 26 Mar 2016, 18:52 UTC

The fire started on 17 March 2016 in Barber, United States, and satellites saw it burning for 10 days. United States agencies (MTBS / NIFC) mapped an official burnt perimeter of 151,444 hectares, spread across 3 counties.

It is the 2th largest in Kansas since 2016 (of 84 with a page). The largest in United States in 2016, of 475.

Burnt area
151,444ha
official perimeter (MTBS / NIFC)
Duration
≈ 10days
17 Mar 2016 – 26 Mar 2016
Counties hit
3
counties
Started on
17 Mar
2016
Heat detections
2,781
in a single hotspot: 609 MW
Danger at start
23
High · FWI index
Average daily power
16.2GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 17 Mar26 Mar
26 Mar 2016

How it evolved, day by day

17 Mar 2016 · 63 MW · 6 19 Mar 2016 · 860 MW · 34 20 Mar 2016 · 174 MW · 7 23 Mar 2016 · 108,817 MW · 2445 24 Mar 2016 · 2,952 MW · 241 25 Mar 2016 · 552 MW · 41 26 Mar 2016 · 30 MW · 7
17 Mar 23 Mar 26 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

29°high
82km/h · peak gust
8%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 7.9 mm on 27 Mar.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned almost the same area as London (1,514 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each county

  1. Barber where it started
    98,762 ha reached on 17 Mar
    34 %
  2. 36,385 ha reached on 17 Mar
    11 %
  3. 16,738 ha reached on 19 Mar
    8.2 %

Burnt area inside each county, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area26 ha
Residents≈ 150

Inside the perimeter there were about 26 hectares of built-up land and about 150 residents (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
17 Mar 19.3 °C 17 % 33 km/h 0.0 mm High 23
18 Mar 9.3 °C 46 % 57 km/h 0.0 mm High 22
19 Mar 10.8 °C 23 % 55 km/h 0.0 mm Moderate 19
20 Mar 10.5 °C 22 % 34 km/h 0.0 mm Moderate 17
21 Mar 22.9 °C 21 % 63 km/h 0.0 mm Very high 47
22 Mar 29.2 °C 13 % 66 km/h 0.0 mm Extreme 54
23 Mar 23.4 °C 8 % 82 km/h 0.0 mm Very extreme 102
24 Mar 13.7 °C 23 % 71 km/h 0.0 mm Very high 40
25 Mar 20.0 °C 19 % 62 km/h 0.0 mm Very high 48
26 Mar 16.6 °C 36 % 46 km/h 0.5 mm High 33
27 Mar after 15.4 °C 23 % 40 km/h 7.9 mm Very low 1

Its twins: fires that started in the same weather

It started with an FWI of 22.9, a minimum humidity of 17% and 3 days without rain. Fires in the area that started in weather like this since 2016: 17.

FWI at the start 22.9
Minimum humidity 17 %
Days without rain 3
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Gorham Fire, November 2017
1,640 ha 6 days FWI 23.8 Min. humidity 16 % 201 km away, in 2017

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

2 days
median duration
1,332 ha
median area
59 %
went past 1,000 ha
4.1 mm
rain at the end (median; 11 of 17 had it)

It was 113.7 times larger than the median of its twins and lasted 10 days, against 2 days.

None of its 17 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 6 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

7.9 mmfirst rain
27 Marthe day after it ended
82km/h · max. gust

It was considered over on 26 Mar, and on 27 Mar 7.9 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 11 of 17, with a median of 4.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 10 Mar 2016
After · 2 Apr 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 2,781Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in United States

Frequently asked questions

How long did the Anderson Creek Fire last?
The official perimeter only gives the start date (23 March 2016). The end comes from the heat detections inside the perimeter: it burned until 26 March 2016 (10 days from 17 March 2016), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The official perimeter published by United States agencies (MTBS / NIFC) is 151,444 hectares (1,514.4 km²). Other tallies, such as daily incident reports, may give slightly different figures.
Which counties burned?
The fire entered 3 counties: Barber (98,762 ha, 34 %); Woods (36,385 ha, 11 %); Comanche (16,738 ha, 8.2 %).
What was the weather like?
During the fire the temperature reached 29.2 °C, humidity dropped to 8 % and gusts hit 82 km/h. The fire danger index (FWI) reached 102, class Very extreme.
Where does this data come from?
From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 17. Their median duration was 2 days and their median area 1,332 ha; 59 % went past 1,000 ha. None of its 17 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 6 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: MTBS (US Geological Survey and US Forest Service), official.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 2,781 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official and in the public domain. For past years it comes from MTBS (Monitoring Trends in Burn Severity), run by the U.S. Geological Survey and the USDA Forest Service, which map it on Landsat and Sentinel-2 imagery. For the current and last year it comes from WFIGS at the National Interagency Fire Center (NIFC): incident perimeters mapped by fire crews, aircraft and imagery. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. County boundaries come from geoBoundaries ADM2 (Public Domain). The area per county is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.