Analalava fire, October 2020 Analalava
The fire started on 17 October 2020 in Analalava, Madagascar, and satellites saw it burning for 22 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,971 hectares from heat detections, spread across a single municipality.
It is the 12th largest in Sofia since 2016 (of 170 with a page). Number 9 in Madagascar in 2020, of 52.
Compare with…
- Burnt area
- 5,971ha
- GWIS perimeter (Copernicus)
- Duration
- 22days
- 17 Oct 2020 – 7 Nov 2020
- Municipalities hit
- 1
- districts
- Started on
- 17 Oct
- 2020
- Heat detections
- 260
- in a single hotspot: 137 MW
- Danger at start
- 12
- Moderate · FWI index
- Average daily power
- 136MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 11.6 mm on 8 Nov.
This area had burned before
61% of the perimeter overlaps earlier fires recorded since 2016: 2,847 ha in 2016, 260 ha in 2017, 952 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 3,634 ha that had burned before.
- 1,478 ha Analalava fire, August 2016 2,074 ha in total; the hectares shown are those it shares with this fire
- 1,039 ha Analalava fire, October 2016 2,152 ha in total; the hectares shown are those it shares with this fire
- 331 ha Analalava fire, October 2016 6,223 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Analalava where it started5,998 ha reached on 17 Oct0.7 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020Inside the perimeter there were about 0.33 hectares of built-up land and about 90 residents (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 17 Oct | 33.6 °C | 29 % | 40 km/h | 0.3 mm | Moderate 12 |
| 18 Oct | 34.6 °C | 31 % | 30 km/h | 0.4 mm | Moderate 13 |
| 19 Oct | 34.2 °C | 35 % | 42 km/h | 0.1 mm | Moderate 16 |
| 20 Oct | 35.3 °C | 37 % | 32 km/h | 0.0 mm | Moderate 15 |
| 21 Oct | 35.7 °C | 34 % | 28 km/h | 0.0 mm | Moderate 15 |
| 22 Oct | 34.2 °C | 37 % | 36 km/h | 0.1 mm | Moderate 17 |
| 23 Oct | 35.1 °C | 32 % | 37 km/h | 0.7 mm | Moderate 18 |
| 24 Oct | 34.8 °C | 31 % | 42 km/h | 0.2 mm | Moderate 21 |
| 25 Oct | 34.4 °C | 31 % | 42 km/h | 0.6 mm | Moderate 21 |
| 26 Oct | 33.9 °C | 36 % | 38 km/h | 0.1 mm | Moderate 21 |
| 27 Oct | 32.4 °C | 42 % | 35 km/h | 2.1 mm | Low 9 |
| 28 Oct | 32.4 °C | 48 % | 40 km/h | 8.0 mm | Very low 2 |
| 29 Oct | 34.8 °C | 36 % | 28 km/h | 0.0 mm | Low 10 |
| 30 Oct | 34.9 °C | 32 % | 44 km/h | 0.0 mm | Moderate 20 |
| 31 Oct | 33.0 °C | 30 % | 35 km/h | 0.2 mm | Moderate 18 |
| 1 Nov | 33.5 °C | 28 % | 40 km/h | 0.0 mm | High 22 |
| 2 Nov | 34.2 °C | 25 % | 40 km/h | 0.0 mm | High 25 |
| 3 Nov | 34.0 °C | 35 % | 41 km/h | 0.2 mm | High 25 |
| 4 Nov | 33.9 °C | 39 % | 43 km/h | 0.0 mm | High 24 |
| 5 Nov | 32.9 °C | 43 % | 40 km/h | 0.4 mm | High 22 |
| 6 Nov | 33.6 °C | 43 % | 41 km/h | 0.0 mm | High 23 |
| 7 Nov | 35.6 °C | 38 % | 39 km/h | 0.0 mm | High 23 |
| 8 Nov after | 33.8 °C | 43 % | 37 km/h | 11.6 mm | Very low 3 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 260Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 5,351 haAnalalava9 October 2024 · 15 days · 4 km away
- 6,223 haAnalalava13 October 2016 · 13 days · 8 km away
- 4,409 haAnalalava2 October 2024 · 15 days · 16 km away
- 2,760 haAnalalava 23 October 2026 · 12 days · 27 km away
- 7,375 haAntsohihy8 September 2026 · 16 days · 34 km away
- 2,736 haBealananaSeptember 2018 · 4 days · 37 km away
Frequently asked questions
- How long did the Analalava fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 17 October 2020 to 7 November 2020 (22 days). The perimeter dates it from 18 October 2020 to 7 November 2020.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,971 hectares (59.7 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Analalava (5,998 ha, 0.7 %).
- What was the weather like?
- During the fire the temperature reached 35.7 °C, humidity dropped to 25 % and gusts hit 44 km/h. The fire danger index (FWI) reached 25, class High.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Madagascar (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
- Start date: 18 October 2020 → 17 October 2020.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 18 October 2020 to 7 November 2020. 260 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.