Skip to content
worldfires
RU · Russia · –

Anadyrsky District fire, June 2026 Anadyrsky District

Out · last detection 8 Jul 2026, 00:07 UTC

The fire started on 18 June 2026 in Anadyrsky District, Russia, and satellites saw it burning for 21 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 11,768 hectares from heat detections, spread across a single municipality.

Number 98 in Russia in 2026, of 420.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Compare with…
Burnt area
11,768ha
GWIS perimeter (Copernicus)
Duration
21days
18 Jun 2026 – 8 Jul 2026
Municipalities hit
1
districts
Started on
18 Jun
2026
Heat detections
922
in a single hotspot: 161 MW
Danger at start
1
Very low · FWI index
Average daily power
631MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 18 Jun8 Jul
8 Jul 2026

How it evolved, day by day

19 Jun 2026 · 41 MW · 6 20 Jun 2026 · 556 MW · 52 21 Jun 2026 · 1,020 MW · 82 22 Jun 2026 · 750 MW · 103 23 Jun 2026 · 185 MW · 23 24 Jun 2026 · 819 MW · 56 25 Jun 2026 · 2,567 MW · 195 26 Jun 2026 · 1,642 MW · 48 27 Jun 2026 · 139 MW · 27 28 Jun 2026 · 57 MW · 3 30 Jun 2026 · 888 MW · 26 1 Jul 2026 · 44 MW · 11 3 Jul 2026 · 6 MW · 1 4 Jul 2026 · 21 MW · 5 5 Jul 2026 · 226 MW · 55 6 Jul 2026 · 850 MW · 112 7 Jul 2026 · 1,511 MW · 113 8 Jul 2026 · 33 MW · 4
19 Jun 25 Jun 3 Jul 7 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (48 passes) and with what wind. Watch the film

The weather it burned in

22°high
45km/h · peak gust
34%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 1.8 mm on 9 Jul.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 7.4% of the area of London (118 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Anadyrsky District where it started
    11,137 ha reached on 19 Jun
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
18 Jun 19.8 °C 46 % 31 km/h 0.0 mm Very low 1
19 Jun 21.5 °C 42 % 27 km/h 0.0 mm Very low 5
20 Jun 22.2 °C 34 % 37 km/h 0.0 mm Moderate 15
21 Jun 17.6 °C 46 % 30 km/h 0.0 mm Moderate 13
22 Jun 20.2 °C 57 % 27 km/h 1.3 mm Moderate 12
23 Jun 21.5 °C 43 % 21 km/h 0.0 mm Low 7
24 Jun 20.2 °C 40 % 25 km/h 1.9 mm Low 6
25 Jun 20.2 °C 38 % 35 km/h 0.0 mm Moderate 15
26 Jun 15.4 °C 62 % 37 km/h 0.0 mm Moderate 15
27 Jun 16.0 °C 34 % 28 km/h 0.0 mm Moderate 16
28 Jun 15.1 °C 54 % 31 km/h 1.4 mm Moderate 14
29 Jun 16.9 °C 64 % 20 km/h 3.6 mm Very low 1
30 Jun 19.3 °C 51 % 32 km/h 0.0 mm Low 6
1 Jul 20.7 °C 47 % 22 km/h 0.0 mm Low 10
2 Jul 14.1 °C 71 % 29 km/h 3.4 mm Low 5
3 Jul 16.3 °C 44 % 22 km/h 0.0 mm Very low 2
4 Jul 20.4 °C 36 % 24 km/h 0.0 mm Low 7
5 Jul 21.0 °C 45 % 22 km/h 0.0 mm Moderate 11
6 Jul 21.8 °C 40 % 33 km/h 0.0 mm Moderate 19
7 Jul 19.8 °C 46 % 40 km/h 0.0 mm Moderate 20
8 Jul 14.9 °C 64 % 45 km/h 1.6 mm Moderate 17
9 Jul after 15.0 °C 50 % 31 km/h 1.8 mm Very low 2

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 11 Jun 2026
After · 15 Jul 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 25 June 2026 the air beside the fire reached 182 µg/m³ of PM2.5. That day averaged 64: 4.3 times the WHO daily guideline (15).

PM2.5 peak182 µg/m³
Days over the guideline10 days
PM10183 µg/m³
Optical depth0.92
16 Jun22 Jun28 Jun4 Jul10 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 922Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Frequently asked questions

How long did the Anadyrsky District fire last?
GWIS (Copernicus) dates it between 18 June 2026 and 8 July 2026: 21 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 11,768 hectares (117.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Anadyrsky District (11,137 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 22.2 °C, humidity dropped to 34 % and gusts hit 45 km/h. The fire danger index (FWI) reached 20, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 922 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.