Skip to content
worldfires
RU · Russia · –

Amursky Rayon fire, 24 October 2021 Amursky Rayon

Out · last detection 29 Oct 2021, 03:36 UTC

The fire started on 24 October 2021 in Amursky Rayon, Russia, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,713 hectares from heat detections, spread across a single municipality.

It is the 88th largest in Khabarovsk Krai since 2016 (of 299 with a page). Number 235 in Russia in 2021, of 581.

Burnt area
7,713ha
GWIS perimeter (Copernicus)
Duration
6days
24 Oct 2021 – 29 Oct 2021
Municipalities hit
1
districts
Started on
24 Oct
2021
Heat detections
286
in a single hotspot: 490 MW
Danger at start
10
Low · FWI index
Average daily power
1.8GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 24 Oct29 Oct
29 Oct 2021

How it evolved, day by day

24 Oct 2021 · 5,239 MW · 130 25 Oct 2021 · 1,756 MW · 128 26 Oct 2021 · 59 MW · 10 29 Oct 2021 · 291 MW · 18
24 Oct 25 Oct 26 Oct 29 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

15°high
35km/h · peak gust
34%lowest humidity

It had gone 7 days without rain (1 mm or more) when it started. Rain came after the fire: 1.9 mm on 6 Nov.

This area had burned before

83% of the perimeter overlaps earlier fires recorded since 2016: 2,661 ha in 2016, 558 ha in 2017, 3,293 ha in 2018, 2,420 ha in 2019, 631 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 6,387 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 4.9% of the area of London (77 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Amursky Rayon where it started
    7,579 ha reached on 24 Oct
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.74 ha
Residents≈ 40

Inside the perimeter there were about 0.74 hectares of built-up land and about 40 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
24 Oct 14.8 °C 34 % 35 km/h 0.0 mm Low 10
25 Oct 15.2 °C 36 % 31 km/h 0.0 mm Low 8
26 Oct 14.2 °C 41 % 28 km/h 0.0 mm Low 8
27 Oct 11.3 °C 56 % 26 km/h 2.2 mm Very low 1
28 Oct 11.5 °C 40 % 30 km/h 0.0 mm Very low 1
29 Oct 12.6 °C 37 % 31 km/h 0.0 mm Very low 4
30 Oct after 11.1 °C 49 % 22 km/h 0.0 mm Very low 4
31 Oct after 7.2 °C 30 % 41 km/h 0.0 mm Low 8
1 Nov after 6.7 °C 39 % 14 km/h 0.0 mm Very low 4
2 Nov after 7.8 °C 27 % 24 km/h 0.0 mm Low 7
3 Nov after 7.8 °C 33 % 15 km/h 0.0 mm Low 6
4 Nov after 7.9 °C 54 % 16 km/h 0.2 mm Low 5
5 Nov after 10.0 °C 57 % 17 km/h 0.0 mm Very low 4
6 Nov after 5.7 °C 34 % 53 km/h 1.9 mm Low 7

Its twins: fires that started in the same weather

It started with an FWI of 9.6, a minimum humidity of 34% and 7 days without rain. Fires in the area that started in weather like this since 2016: 18.

FWI at the start 9.6
Minimum humidity 34 %
Days without rain 7
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Smidovichsky District fire, October 2016
6,881 ha 5 days FWI 11.5 Min. humidity 34 % 79 km away, in 2016

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

7 days
median duration
6,953 ha
median area
39 %
went past 10,000 ha
3.0 mm
rain at the end (median; 17 of 18 had it)

It burned an area similar to its twins (7,713 ha against a median of 6,953 ha) and lasted 6 days, against 7 days.

In 1 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.9 mmfirst rain
6 Nov8 days after it ended
35km/h · max. gust

It was considered over on 29 Oct, and on 6 Nov 1.9 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 17 of 18, with a median of 3.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 17 Oct 2021
After · 5 Nov 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 286Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Amursky Rayon fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 24 October 2021 to 29 October 2021 (6 days). The perimeter dates it from 24 October 2021 to 26 October 2021.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,713 hectares (77.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Amursky Rayon (7,579 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 15.2 °C, humidity dropped to 34 % and gusts hit 35 km/h. The fire danger index (FWI) reached 10, class Low.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 18. Their median duration was 7 days and their median area 6,953 ha; 39 % went past 10,000 ha. In 1 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 26 October 2021 → 29 October 2021.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 24 October 2021 to 26 October 2021. 286 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.