Skip to content
worldfires
US · United States · –

Ammerman Creek Fire, June 2017 Yukon-Koyukuk

Out · last detection 11 Jul 2017, 21:32 UTC

The fire started on 23 June 2017 in Yukon-Koyukuk, United States, and satellites saw it burning for 19 days. United States agencies (MTBS / NIFC) mapped an official burnt perimeter of 9,830 hectares, spread across a single county.

It is the 99th largest in Alaska since 2016 (of 472 with a page). Number 86 in United States in 2017, of 619.

Compare with…
Burnt area
9,830ha
official perimeter (MTBS / NIFC)
Duration
≈ 19days
23 Jun 2017 – 11 Jul 2017
Counties hit
1
counties
Started on
23 Jun
2017
Heat detections
539
in a single hotspot: 92 MW
Danger at start
4
Very low · FWI index
Average daily power
281MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 23 Jun11 Jul
11 Jul 2017

How it evolved, day by day

23 Jun 2017 · 633 MW · 49 24 Jun 2017 · 519 MW · 77 25 Jun 2017 · 314 MW · 45 26 Jun 2017 · 69 MW · 14 27 Jun 2017 · 66 MW · 18 28 Jun 2017 · 176 MW · 31 29 Jun 2017 · 204 MW · 34 30 Jun 2017 · 397 MW · 47 1 Jul 2017 · 342 MW · 45 2 Jul 2017 · 129 MW · 20 7 Jul 2017 · 239 MW · 35 8 Jul 2017 · 759 MW · 86 9 Jul 2017 · 226 MW · 15 10 Jul 2017 · 135 MW · 22 11 Jul 2017 · 3 MW · 1
23 Jun 26 Jun 29 Jun 8 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

26°high
43km/h · peak gust
24%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 5.7 mm on 15 Jul.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 6.2% of the area of London (98 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each county

  1. Yukon-Koyukuk where it started
    11,122 ha reached on 23 Jun
    0.0 %

Burnt area inside each county, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
23 Jun 22.1 °C 29 % 43 km/h 0.0 mm Very low 4
24 Jun 20.0 °C 32 % 38 km/h 0.0 mm Moderate 13
25 Jun 20.1 °C 29 % 42 km/h 0.0 mm Moderate 14
26 Jun 18.0 °C 44 % 26 km/h 0.0 mm Moderate 12
27 Jun 19.0 °C 47 % 28 km/h 0.0 mm Moderate 13
28 Jun 21.5 °C 42 % 28 km/h 0.7 mm Moderate 13
29 Jun 23.3 °C 37 % 24 km/h 0.0 mm Moderate 13
30 Jun 24.4 °C 30 % 26 km/h 0.0 mm Moderate 17
1 Jul 25.6 °C 24 % 23 km/h 0.0 mm Moderate 20
2 Jul 22.5 °C 39 % 34 km/h 0.5 mm High 24
3 Jul 20.4 °C 39 % 34 km/h 0.2 mm Moderate 21
4 Jul 22.7 °C 38 % 27 km/h 0.7 mm Moderate 19
5 Jul 20.0 °C 59 % 33 km/h 4.6 mm Very low 5
6 Jul 25.3 °C 32 % 39 km/h 0.0 mm Low 7
7 Jul 26.2 °C 27 % 34 km/h 0.0 mm High 23
8 Jul 25.1 °C 41 % 42 km/h 0.5 mm Moderate 16
9 Jul 22.0 °C 44 % 37 km/h 0.6 mm Moderate 13
10 Jul 25.9 °C 38 % 41 km/h 0.0 mm Moderate 19
11 Jul 19.5 °C 32 % 42 km/h 0.0 mm High 30
12 Jul after 21.5 °C 37 % 27 km/h 0.0 mm Moderate 20
13 Jul after 23.2 °C 36 % 26 km/h 0.0 mm Moderate 21
14 Jul after 27.0 °C 31 % 34 km/h 0.0 mm High 26
15 Jul after 24.9 °C 45 % 38 km/h 5.7 mm Moderate 13

Its twins: fires that started in the same weather

It started with an FWI of 4.2, a minimum humidity of 29% and rain the day before. Fires in the area that started in weather like this since 2018: 25.

FWI at the start 4.2
Minimum humidity 29 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Yukon, Unorganized fire, July 2022
1,530 ha 3 days FWI 4.7 Min. humidity 30 % 151 km away, in 2022

First rain (1 mm or more) after it ended: 2.7 mm on 8 Jul.

What happened to them

9 days
median duration
2,660 ha
median area
76 %
went past 1,000 ha
2.9 mm
rain at the end (median; 25 of 25 had it)

It was 3.7 times larger than the median of its twins and lasted 19 days, against 9 days.

Only 5 of its 25 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 2.9 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

5.7 mmfirst rain
15 Jul4 days after it ended
43km/h · max. gust

It was considered over on 11 Jul, and on 15 Jul 5.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 25 of 25, with a median of 2.9 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2018.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 16 Jun 2017
After · 18 Jul 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 539Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Frequently asked questions

How long did the Ammerman Creek Fire last?
The official perimeter only gives the start date (24 June 2017). The end comes from the heat detections inside the perimeter: it burned until 11 July 2017 (19 days from 23 June 2017), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The official perimeter published by United States agencies (MTBS / NIFC) is 9,830 hectares (98.3 km²). Other tallies, such as daily incident reports, may give slightly different figures.
Which counties burned?
The fire only entered Yukon-Koyukuk (11,122 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 26.2 °C, humidity dropped to 24 % and gusts hit 43 km/h. The fire danger index (FWI) reached 30, class High.
Where does this data come from?
From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2018 with a similar FWI, humidity and dry spell: 25. Their median duration was 9 days and their median area 2,660 ha; 76 % went past 1,000 ha. Only 5 of its 25 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 2.9 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: MTBS (US Geological Survey and US Forest Service), official.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 539 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official and in the public domain. For past years it comes from MTBS (Monitoring Trends in Burn Severity), run by the U.S. Geological Survey and the USDA Forest Service, which map it on Landsat and Sentinel-2 imagery. For the current and last year it comes from WFIGS at the National Interagency Fire Center (NIFC): incident perimeters mapped by fire crews, aircraft and imagery. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. County boundaries come from geoBoundaries ADM2 (Public Domain). The area per county is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.