Aldansky Ulus fire, August 2020 Aldansky Ulus
The fire started on 28 August 2020 in Aldansky Ulus, Russia, and satellites saw it burning for 30 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,148 hectares from heat detections, spread across a single municipality.
It is the 919th largest in Sakha Republic since 2016 (of 1422 with a page). Number 324 in Russia in 2020, of 594.
- Burnt area
- 5,148ha
- GWIS perimeter (Copernicus)
- Duration
- 30days
- 28 Aug 2020 – 26 Sept 2020
- Municipalities hit
- 1
- districts
- Started on
- 28 Aug
- 2020
- Heat detections
- 870
- in a single hotspot: 55 MW
- Danger at start
- 8
- Low · FWI index
- Energy released
- 2.9GW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 2.8 mm on 27 Sept.
This area had burned before
No earlier perimeters overlap this fire since 2016, when the satellite record begins.
What happened to each town
-
Aldansky Ulus where it started5,134 ha reached on 24 Aug0.0 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 24 Aug | 20.6 °C | 31 % | 22 km/h | 0.0 mm | Low 8 |
| 25 Aug | 16.8 °C | 41 % | 38 km/h | 0.0 mm | Low 9 |
| 26 Aug | 14.2 °C | 45 % | 39 km/h | 0.0 mm | Low 9 |
| 27 Aug | 17.0 °C | 37 % | 24 km/h | 0.0 mm | Low 8 |
| 28 Aug | 20.0 °C | 32 % | 16 km/h | 0.0 mm | Low 10 |
| 29 Aug | 22.3 °C | 30 % | 41 km/h | 0.0 mm | Moderate 15 |
| 30 Aug | 20.3 °C | 50 % | 32 km/h | 0.0 mm | Moderate 13 |
| 31 Aug | 20.6 °C | 53 % | 15 km/h | 0.0 mm | Low 9 |
| 1 Sept | 20.1 °C | 60 % | 27 km/h | 1.3 mm | Very low 3 |
| 2 Sept | 18.4 °C | 48 % | 19 km/h | 0.0 mm | Low 6 |
| 3 Sept | 24.0 °C | 34 % | 34 km/h | 0.0 mm | Moderate 13 |
| 4 Sept | 22.4 °C | 36 % | 30 km/h | 0.0 mm | Moderate 14 |
| 5 Sept | 16.4 °C | 65 % | 27 km/h | 0.0 mm | Low 9 |
| 6 Sept | 20.2 °C | 46 % | 18 km/h | 0.0 mm | Low 9 |
| 7 Sept | 18.6 °C | 41 % | 24 km/h | 0.0 mm | Low 11 |
| 8 Sept | 17.5 °C | 51 % | 24 km/h | 0.2 mm | Moderate 12 |
| 9 Sept | 16.7 °C | 39 % | 38 km/h | 0.0 mm | Moderate 14 |
| 10 Sept | 18.2 °C | 54 % | 30 km/h | 2.9 mm | Very low 3 |
| 11 Sept | 16.3 °C | 69 % | 23 km/h | 3.7 mm | Very low 0 |
| 12 Sept | 23.2 °C | 52 % | 23 km/h | 0.5 mm | Very low 2 |
| 13 Sept | 26.1 °C | 29 % | 29 km/h | 0.0 mm | Low 11 |
| 14 Sept | 14.0 °C | 61 % | 27 km/h | 0.0 mm | Low 9 |
| 15 Sept | 14.7 °C | 42 % | 34 km/h | 0.0 mm | Low 10 |
| 16 Sept | 13.5 °C | 49 % | 26 km/h | 0.0 mm | Low 9 |
| 17 Sept | 15.2 °C | 41 % | 26 km/h | 0.0 mm | Low 10 |
| 18 Sept | 14.0 °C | 37 % | 37 km/h | 0.0 mm | Moderate 12 |
| 19 Sept | 15.0 °C | 34 % | 27 km/h | 0.0 mm | Moderate 12 |
| 20 Sept | 15.6 °C | 36 % | 20 km/h | 0.0 mm | Moderate 12 |
| 21 Sept | 17.0 °C | 35 % | 15 km/h | 0.0 mm | Moderate 12 |
| 22 Sept | 16.6 °C | 39 % | 20 km/h | 0.0 mm | Moderate 14 |
| 23 Sept | 14.6 °C | 35 % | 18 km/h | 0.0 mm | Moderate 14 |
| 24 Sept | 13.0 °C | 36 % | 30 km/h | 0.0 mm | Moderate 15 |
| 25 Sept | 13.9 °C | 48 % | 31 km/h | 0.1 mm | Moderate 14 |
| 26 Sept | 16.4 °C | 42 % | 62 km/h | 2.5 mm | Low 6 |
| 27 Sept after | 16.8 °C | 33 % | 56 km/h | 2.8 mm | Very low 4 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 870Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Frequently asked questions
- How long did the Aldansky Ulus fire last?
- GWIS (Copernicus) dates it between 28 August 2020 and 26 September 2020: 30 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,148 hectares (51.5 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Aldansky Ulus (5,134 ha, 0.0 %).
- What was the weather like?
- During the fire the temperature reached 26.1 °C, humidity dropped to 29 % and gusts hit 62 km/h. The fire danger index (FWI) reached 15, class Moderate.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 112
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.