Skip to content
worldfires
TR · Türkiye · –

Akçakale fire, November 2026 Eyyübiye, Akçakale, Harran

Dying down · last detection 18 Nov 2026, 10:38 UTC

Satellites first detected fire on 10 November 2026 in Akçakale, Türkiye. It has been active for 9 days, with 32 heat detections and an area with fire of about 406 hectares rebuilt from them, spread across 4 municipalities.

The power measured by the satellite is low (18.2 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Compare with…

Suggestions: Gölbaşı · 2025Batman Merkez · 2019

Copernicus has not yet published the burnt perimeter, which takes a few days to measure on satellite imagery. For now the area is the one rebuilt from heat detections (about 14 hectares per pixel). When the perimeter arrives, this page picks it up on its own and keeps the same address.

Is it still active?

No detections since 18 Nov 2026, 10:38 UTC. That usually means no flame is visible from space any more, although hotspots may remain. Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.

Area with fire
≈ 406ha
rebuilt from hotspots, no official perimeter yet
Duration
9days
10 Nov 2026 – 18 Nov 2026
Municipalities hit
4
districts
Started on
10 Nov
2026
Heat detections
32
in a single hotspot: 18 MW
Danger at start
6
Low · FWI index
Average daily power
34MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Nov18 Nov
18 Nov 2026

How it evolved, day by day

10 Nov 2026 · 2 MW · 1 11 Nov 2026 · 0 MW · 0 12 Nov 2026 · 0 MW · 0 13 Nov 2026 · 50 MW · 7 14 Nov 2026 · 17 MW · 1 15 Nov 2026 · 9 MW · 3 16 Nov 2026 · 96 MW · 14 18 Nov 2026 · 34 MW · 8
10 Nov 12 Nov 14 Nov 16 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

20°high
20km/h · peak gust
28%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 1.2 mm on 19 Nov.

What happened to each town

  1. Eyyübiye 379,123 inhabitants · 17.4 km from the centre
    210 ha reached on 13 Nov
    0.1 %
  2. Akçakale where it started
    140 ha reached on 10 Nov
    0.1 %
  3. Harran 87,843 inhabitants · 5.7 km from the centre
    42 ha reached on 12 Nov
    0.0 %
  4. Haliliye 376,251 inhabitants · 18.5 km from the centre
    14 ha reached on 16 Nov
    0.0 %

Area with fire inside each municipality, rebuilt from heat detections (about 14 hectares per VIIRS pixel). An estimate until the official perimeter arrives. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Nov 14.3 °C 28 % 18 km/h 0.1 mm Low 6
11 Nov 16.2 °C 31 % 20 km/h 0.0 mm Low 7
12 Nov 16.7 °C 38 % 20 km/h 0.0 mm Low 7
13 Nov 18.7 °C 37 % 18 km/h 0.0 mm Low 8
14 Nov 20.0 °C 44 % 18 km/h 0.0 mm Low 8
15 Nov 20.5 °C 48 % 18 km/h 0.0 mm Low 8
16 Nov 20.5 °C 53 % 19 km/h 0.6 mm Low 6
17 Nov 19.0 °C 59 % 20 km/h 0.2 mm Low 6
18 Nov 18.9 °C 61 % 19 km/h 4.2 mm Very low 1
19 Nov after 19.6 °C 58 % 40 km/h 1.2 mm Very low 1

Its twins: fires that started in the same weather

It started with an FWI of 5.9, a minimum humidity of 28% and 2 days without rain. Fires in the area that started in weather like this since 2016: 6.

FWI at the start 5.9
Minimum humidity 28 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Gölbaşı fire, December 2025
147 ha 1 day FWI 6.3 Min. humidity 28 % 168 km away, in 2025

First rain (1 mm or more) after it ended: 4.0 mm on 26 Dec.

What happened to them

Fires in the area that started in similar weather: 6. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Nov 2026
After · 19 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 15 November 2026 the air beside the fire reached 24 µg/m³ of PM2.5. That day averaged 16: 1.1 times the WHO daily guideline (15).

PM2.5 peak24 µg/m³
Days over the guideline1 day
PM1032 µg/m³
Optical depth0.44
7 Nov9 Nov11 Nov13 Nov15 Nov
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 32Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Frequently asked questions

How long did the Akçakale fire last?
According to the heat detections seen by satellite, it burned from 10 November 2026 to 18 November 2026 (9 days between the first and the last detection). There is no perimeter yet to date it.
How much area did it burn?
There is no official perimeter yet. Heat detections rebuild about 406 hectares with fire (4.1 km²); Copernicus will publish the measured figure within days.
Which municipalities burned?
The fire entered 4 municipalities: Eyyübiye (210 ha, 0.1 %); Akçakale (140 ha, 0.1 %); Harran (42 ha, 0.0 %); Haliliye (14 ha, 0.0 %).
Is the Akçakale fire still active?
No fire detections since 18 Nov 2026, 10:38 UTC. A lack of detections is not an official extinction.
Did the fire reach a town?
The fire came within 5.7 km of the centre of Harran, the closest of the areas it touched. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 20.5 °C, humidity dropped to 28 % and gusts hit 20 km/h. The fire danger index (FWI) reached 8, class Low.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Türkiye (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 6 Changes in area, dates, name, official record or merged pages, compared every night since 16 November 2026.
  1. Area: ≈ 182 → ≈ 406 ha.
  2. Start date: 9 November 2026 → 10 November 2026.
  3. Name: Harran → Akçakale.
  4. The page “Eyyübiye, 13 November 2026” has been merged into this one: it was the same fire.
  5. Page published (≈ 210 ha).
  6. Page published (≈ 182 ha).

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • No perimeter yet: the area (≈ 406 ha) is estimated by counting VIIRS pixels with fire, about 14 ha each.
  • Dates of the first and last VIIRS detection of the cluster. 32 Suomi-NPP VIIRS detections on those dates.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.