Skip to content
worldfires
GN · Guinea · –

Wendou Mbour fire, May 2016 Wendou Mbour, Koba, Koumbia

Out · last detection 4 May 2016, 14:49 UTC

The fire started on 1 May 2016 in Wendou Mbour, Guinea, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,694 hectares from heat detections, spread across 4 municipalities.

It is the 84th largest in Boké since 2016 (of 195 with a page). Number 76 in Guinea in 2016, of 172.

Burnt area
2,694ha
GWIS perimeter (Copernicus)
Duration
4days
1 May 2016 – 4 May 2016
Municipalities hit
4
sub-prefectures
Started on
1 May
2016
Heat detections
87
in a single hotspot: 0 MW
Danger at start
38
High · FWI index
Average daily power
1.5GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 1 May4 May
4 May 2016

How it evolved, day by day

1 May 2016 · 2,631 MW · 34 2 May 2016 · 1,774 MW · 23 3 May 2016 · 1,356 MW · 25 4 May 2016 · 50 MW · 5
1 May 2 May 3 May 4 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
39km/h · peak gust
28%lowest humidity

It had gone 6 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.7% of the area of London (27 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Wendou Mbour where it started
    2,480 ha
    1.7 %
  2. 199 ha
    0.3 %
  3. 25 ha
    0.0 %
  4. 4 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area1.5 ha
Residents≈ 550

Inside the perimeter there were about 1.5 hectares of built-up land and about 550 residents (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
1 May 39.4 °C 28 % 38 km/h 0.0 mm High 38
2 May 37.1 °C 33 % 39 km/h 0.0 mm Very high 40
3 May 37.4 °C 35 % 36 km/h 0.0 mm Very high 38
4 May 36.3 °C 37 % 28 km/h 0.0 mm High 36
5 May after 38.7 °C 29 % 45 km/h 0.0 mm Very high 39
6 May after 36.1 °C 37 % 37 km/h 0.0 mm High 37
7 May after 36.7 °C 30 % 36 km/h 0.0 mm High 38
8 May after 37.0 °C 31 % 35 km/h 0.0 mm High 35
9 May after 38.0 °C 29 % 27 km/h 0.0 mm High 34
10 May after 38.0 °C 30 % 30 km/h 0.0 mm High 36
11 May after 37.9 °C 30 % 34 km/h 0.0 mm High 36
12 May after 37.9 °C 31 % 33 km/h 0.0 mm High 38
13 May after 36.7 °C 35 % 38 km/h 0.0 mm Very high 41
14 May after 36.8 °C 41 % 34 km/h 0.0 mm High 36

Its twins: fires that started in the same weather

It started with an FWI of 37.9, a minimum humidity of 28% and 6 days without rain. Fires in the area that started in weather like this since 2016: 31.

FWI at the start 37.9
Minimum humidity 28 %
Days without rain 6
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Wendou Mbour fire, April 2018
2,718 ha 11 days FWI 38.1 Min. humidity 28 % 12 km away, in 2018

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

13 days
median duration
3,128 ha
median area
100 %
went past 1,000 ha
3.1 mm
rain at the end (median; 14 of 31 had it)

It burned an area similar to its twins (2,694 ha against a median of 3,128 ha) and lasted 4 days, against 13 days.

In 17 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
39km/h · max. gust

It was considered over on 4 May, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 14 of 31, with a median of 3.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 24 Apr 2016
After · 11 May 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 0Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Guinea

Frequently asked questions

How long did the Wendou Mbour fire last?
GWIS (Copernicus) dates it between 1 May 2016 and 4 May 2016: 4 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,694 hectares (26.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 4 municipalities: Wendou Mbour (2,480 ha, 1.7 %); Koba (199 ha, 0.3 %); Koumbia (25 ha, 0.0 %); Missira (4 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 39.4 °C, humidity dropped to 28 % and gusts hit 39 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Guinea (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 31. Their median duration was 13 days and their median area 3,128 ha; 100 % went past 1,000 ha. In 17 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 26 April 2016 → 1 May 2016.
  2. Start date: 1 May 2016 → 26 April 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.