Skip to content
worldfires
ID · Indonesia · →

Seruyan fire, 20 September 2026 Seruyan

Out · last detection 25 Oct 2026, 06:12 UTC

The fire started on 20 September 2026 in Seruyan, Indonesia, and satellites saw it burning for 36 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 26,032 hectares from heat detections, spread across a single municipality.

It is the 18th largest in Central Kalimantan since 2016 (of 318 with a page). Number 44 in Indonesia in 2026, of 1022.

Compare with…
Burnt area
26,032ha
GWIS perimeter (Copernicus)
Duration
36days
20 Sept 2026 – 25 Oct 2026
Municipalities hit
1
regencies
Started on
20 Sept
2026
Heat detections
777
in a single hotspot: 85 MW
Danger at start
15
Moderate · FWI index
Average daily power
183MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 Sept25 Oct
25 Oct 2026

How it evolved, day by day

20 Sept 2026 · 319 MW · 45 21 Sept 2026 · 184 MW · 31 22 Sept 2026 · 756 MW · 63 23 Sept 2026 · 233 MW · 20 24 Sept 2026 · 49 MW · 8 27 Sept 2026 · 119 MW · 9 28 Sept 2026 · 33 MW · 4 29 Sept 2026 · 70 MW · 7 30 Sept 2026 · 9 MW · 5 1 Oct 2026 · 13 MW · 3 2 Oct 2026 · 178 MW · 27 3 Oct 2026 · 41 MW · 7 4 Oct 2026 · 23 MW · 5 5 Oct 2026 · 123 MW · 24 6 Oct 2026 · 18 MW · 7 7 Oct 2026 · 426 MW · 75 8 Oct 2026 · 216 MW · 44 9 Oct 2026 · 7 MW · 3 10 Oct 2026 · 220 MW · 29 11 Oct 2026 · 151 MW · 27 12 Oct 2026 · 197 MW · 24 13 Oct 2026 · 26 MW · 11 14 Oct 2026 · 169 MW · 27 15 Oct 2026 · 44 MW · 8 16 Oct 2026 · 8 MW · 6 17 Oct 2026 · 128 MW · 19 18 Oct 2026 · 926 MW · 97 19 Oct 2026 · 0 MW · 0 20 Oct 2026 · 0 MW · 0 21 Oct 2026 · 81 MW · 18 22 Oct 2026 · 395 MW · 55 23 Oct 2026 · 398 MW · 52 24 Oct 2026 · 101 MW · 17 25 Oct 2026 · 0 MW · 0
20 Sept 27 Sept 2 Oct 7 Oct 12 Oct 17 Oct 18 Oct 22 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
46km/h · peak gust
45%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 8.0 mm on 26 Oct.

This area had burned before

66% of the perimeter overlaps earlier fires recorded since 2016: 17,099 ha in 2019, 11,094 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 17,145 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 16% of the area of London (260 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Seruyan where it started
    26,230 ha reached on 20 Sept
    1.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.44 ha
Residents≈ 100

Inside the perimeter there were about 0.44 hectares of built-up land and about 100 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
20 Sept 33.3 °C 47 % 40 km/h 0.0 mm Moderate 15
21 Sept 32.9 °C 52 % 38 km/h 0.1 mm Moderate 15
22 Sept 33.5 °C 48 % 38 km/h 0.0 mm Moderate 15
23 Sept 33.1 °C 53 % 38 km/h 0.0 mm Moderate 16
24 Sept 33.6 °C 51 % 34 km/h 0.5 mm Moderate 16
25 Sept 31.9 °C 63 % 36 km/h 5.2 mm Very low 2
26 Sept 32.9 °C 64 % 31 km/h 5.1 mm Very low 1
27 Sept 31.5 °C 68 % 30 km/h 7.0 mm Very low 0
28 Sept 32.9 °C 55 % 35 km/h 0.1 mm Very low 3
29 Sept 34.0 °C 52 % 34 km/h 0.8 mm Low 7
30 Sept 31.7 °C 63 % 34 km/h 7.6 mm Very low 1
1 Oct 33.6 °C 48 % 37 km/h 1.8 mm Very low 3
2 Oct 32.8 °C 54 % 39 km/h 0.4 mm Low 7
3 Oct 32.8 °C 51 % 41 km/h 0.1 mm Low 10
4 Oct 32.9 °C 50 % 39 km/h 0.3 mm Low 11
5 Oct 33.5 °C 48 % 40 km/h 0.0 mm Moderate 12
6 Oct 33.2 °C 50 % 41 km/h 0.0 mm Moderate 13
7 Oct 33.4 °C 49 % 38 km/h 0.1 mm Moderate 13
8 Oct 33.2 °C 46 % 37 km/h 0.0 mm Moderate 14
9 Oct 32.7 °C 53 % 33 km/h 1.8 mm Low 7
10 Oct 33.0 °C 51 % 38 km/h 1.9 mm Low 7
11 Oct 33.7 °C 48 % 43 km/h 0.0 mm Moderate 14
12 Oct 33.9 °C 45 % 41 km/h 0.3 mm Moderate 17
13 Oct 33.9 °C 47 % 44 km/h 0.1 mm Moderate 18
14 Oct 33.8 °C 47 % 41 km/h 0.0 mm Moderate 18
15 Oct 32.3 °C 65 % 40 km/h 4.5 mm Very low 3
16 Oct 33.3 °C 53 % 42 km/h 2.9 mm Very low 4
17 Oct 33.3 °C 50 % 46 km/h 0.0 mm Moderate 13
18 Oct 32.8 °C 49 % 41 km/h 0.0 mm Moderate 14
19 Oct 33.2 °C 57 % 34 km/h 13.6 mm Very low 1
20 Oct 33.9 °C 51 % 34 km/h 0.3 mm Low 6
21 Oct 33.7 °C 47 % 40 km/h 1.9 mm Low 7
22 Oct 33.6 °C 47 % 41 km/h 1.2 mm Low 9
23 Oct 33.5 °C 52 % 37 km/h 0.7 mm Low 10
24 Oct 33.3 °C 58 % 34 km/h 2.5 mm Very low 3
25 Oct 32.2 °C 71 % 29 km/h 5.4 mm Very low 1
26 Oct after 30.3 °C 77 % 23 km/h 8.0 mm Very low 0

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Sept 2026
After · 28 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 19 October 2026 the air beside the fire reached 477 µg/m³ of PM2.5. That day averaged 296: 20 times the WHO daily guideline (15).

PM2.5 peak477 µg/m³
Days over the guideline35 days
PM10484 µg/m³
Optical depth5.72
1819202122232425262728293012345678910111213141516171819202122
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 777Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Indonesia ›

Frequently asked questions

How long did the Seruyan fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 20 September 2026 to 25 October 2026 (36 days). The perimeter dates it from 27 September 2026 to 25 October 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 26,032 hectares (260.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Seruyan (26,230 ha, 1.6 %).
Is the Seruyan fire still active?
No fire detections since 25 Oct 2026, 06:12 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 34.0 °C, humidity dropped to 45 % and gusts hit 46 km/h. The fire danger index (FWI) reached 18, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Indonesia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings ›

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 24 October 2026 → 25 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 4 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 27 September 2026 to 25 October 2026. 777 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.