Skip to content
worldfires
MW · Malawi · –

Nkhata Bay fire, 13 October 2026 Nkhata Bay

Out · last detection

The fire started on in Nkhata Bay, Malawi, and satellites saw it burning for 37 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 13,463 hectares from heat detections, spread across a single municipality.

Number 5 in Malawi in 2026, of 112.

GWIS near-real-time perimeter, from the layer that changed in August 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Compare with…

Suggestions: Nkhata Bay · 2025Nkhata Bay · 2023

Burnt area
13,463ha
GWIS perimeter (Copernicus)
Duration
37days
13 Oct 2026 – 18 Nov 2026
Municipalities hit
1
districts
Started on
13 Oct
2026
Heat detections
503
in a single hotspot: 101 MW
Danger at start
15
Moderate · FWI index
Average daily power
130MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 13 Oct18 Nov
18 Nov 2026

How it evolved, day by day

13 Oct 2026 · 0 MW · 0 14 Oct 2026 · 3 MW · 2 15 Oct 2026 · 131 MW · 6 16 Oct 2026 · 44 MW · 11 17 Oct 2026 · 66 MW · 12 18 Oct 2026 · 32 MW · 11 19 Oct 2026 · 11 MW · 4 20 Oct 2026 · 25 MW · 3 21 Oct 2026 · 185 MW · 18 22 Oct 2026 · 70 MW · 13 23 Oct 2026 · 101 MW · 25 24 Oct 2026 · 280 MW · 24 25 Oct 2026 · 38 MW · 11 26 Oct 2026 · 143 MW · 15 27 Oct 2026 · 143 MW · 20 28 Oct 2026 · 109 MW · 16 29 Oct 2026 · 271 MW · 14 30 Oct 2026 · 37 MW · 1 31 Oct 2026 · 8 MW · 1 1 Nov 2026 · 86 MW · 15 2 Nov 2026 · 140 MW · 20 3 Nov 2026 · 401 MW · 56 4 Nov 2026 · 367 MW · 46 5 Nov 2026 · 253 MW · 20 6 Nov 2026 · 62 MW · 11 7 Nov 2026 · 406 MW · 18 8 Nov 2026 · 172 MW · 16 9 Nov 2026 · 206 MW · 25 10 Nov 2026 · 337 MW · 35 11 Nov 2026 · 47 MW · 11 13 Nov 2026 · 3 MW · 3 14 Nov 2026 · 25 MW · 4 16 Nov 2026 · 57 MW · 12 18 Nov 2026 · 24 MW · 4
13 Oct 20 Oct 27 Oct 7 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (136 passes) and with what wind. Watch the film

The weather it burned in

32°high
41km/h · peak gust
32%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 10.2 mm on 19 Nov.

This area had burned before

5% of the perimeter overlaps earlier fires recorded since 2016: 71 ha in 2023, 826 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 613 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 8.5% of the area of London (135 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Nkhata Bay where it started
    15,080 ha reached on 13 Oct
    3.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area37 ha
Residents≈ 4,400

Inside the perimeter there were about 37 hectares of built-up land and about 4,400 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
13 Oct 29.2 °C 48 % 25 km/h 0.3 mm Moderate 15
14 Oct 28.4 °C 48 % 33 km/h 2.4 mm Low 5
15 Oct 28.7 °C 51 % 25 km/h 3.6 mm Very low 3
16 Oct 29.2 °C 44 % 35 km/h 2.5 mm Very low 4
17 Oct 27.8 °C 51 % 31 km/h 0.4 mm Moderate 11
18 Oct 28.5 °C 49 % 34 km/h 0.2 mm Moderate 14
19 Oct 29.4 °C 38 % 30 km/h 0.2 mm Moderate 16
20 Oct 30.0 °C 50 % 23 km/h 0.0 mm Moderate 14
21 Oct 30.5 °C 52 % 23 km/h 0.0 mm Moderate 15
22 Oct 31.2 °C 46 % 24 km/h 0.0 mm Moderate 18
23 Oct 31.9 °C 40 % 26 km/h 0.0 mm Moderate 21
24 Oct 31.0 °C 48 % 34 km/h 0.0 mm Moderate 20
25 Oct 29.2 °C 52 % 34 km/h 0.3 mm Moderate 19
26 Oct 30.2 °C 48 % 15 km/h 0.1 mm Moderate 19
27 Oct 29.9 °C 49 % 32 km/h 0.5 mm Moderate 17
28 Oct 31.6 °C 32 % 30 km/h 0.0 mm Moderate 21
29 Oct 30.5 °C 46 % 20 km/h 0.0 mm High 22
30 Oct 28.8 °C 58 % 41 km/h 2.9 mm Low 9
31 Oct 27.5 °C 66 % 28 km/h 1.6 mm Low 6
1 Nov 28.5 °C 55 % 21 km/h 2.0 mm Low 6
2 Nov 29.5 °C 50 % 35 km/h 0.0 mm Moderate 13
3 Nov 30.9 °C 42 % 23 km/h 0.1 mm Moderate 18
4 Nov 30.0 °C 52 % 27 km/h 0.0 mm Moderate 19
5 Nov 30.3 °C 48 % 30 km/h 1.5 mm Moderate 14
6 Nov 30.9 °C 41 % 31 km/h 1.7 mm Low 10
7 Nov 31.2 °C 40 % 28 km/h 0.1 mm Moderate 19
8 Nov 31.8 °C 47 % 31 km/h 0.0 mm High 22
9 Nov 31.8 °C 43 % 27 km/h 0.0 mm High 22
10 Nov 29.2 °C 49 % 33 km/h 0.4 mm High 29
11 Nov 29.1 °C 52 % 30 km/h 1.7 mm Moderate 13
12 Nov 28.7 °C 57 % 30 km/h 1.3 mm Moderate 13
13 Nov 28.7 °C 57 % 23 km/h 0.0 mm Moderate 18
14 Nov 29.2 °C 51 % 26 km/h 1.1 mm Moderate 16
15 Nov 28.8 °C 59 % 26 km/h 2.4 mm Moderate 13
16 Nov 27.9 °C 64 % 23 km/h 2.3 mm Low 6
17 Nov 28.5 °C 64 % 20 km/h 6.5 mm Very low 2
18 Nov 28.8 °C 58 % 18 km/h 2.9 mm Very low 1
19 Nov after 28.0 °C 65 % 24 km/h 10.2 mm Very low 1

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 6 Oct 2026
After · 21 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 23 October 2026 the air beside the fire reached 46 µg/m³ of PM2.5. That day averaged 27: 1.8 times the WHO daily guideline (15).

PM2.5 peak46 µg/m³
Days over the guideline10 days
PM1049 µg/m³
Optical depth0.54
12 Oct15 Oct18 Oct21 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 503Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Malawi

Frequently asked questions

How long did the Nkhata Bay fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 13 October 2026 to 18 November 2026 (37 days). The perimeter dates it from 20 October 2026 to 11 November 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 13,463 hectares (134.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Nkhata Bay (15,080 ha, 3.6 %).
Is the Nkhata Bay fire still active?
No fire detections since 18 Nov 2026, 23:11 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 31.9 °C, humidity dropped to 32 % and gusts hit 41 km/h. The fire danger index (FWI) reached 29, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Malawi (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 18 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 23 October 2026 → 18 November 2026.
  2. Area: 13,065 → 13,425 ha.
  3. Area: 12,641 → 13,065 ha.
  4. Area: 11,561 → 12,641 ha.
  5. Area: 11,004 → 11,561 ha.
  6. Area: 10,550 → 11,004 ha.
  7. Area: 9,999 → 10,550 ha.
  8. Area: 7,335 → 9,999 ha.
  9. The page “Nkhata Bay, 17 October 2026” has been merged into this one: it was the same fire.
  10. Area: 6,272 → 7,335 ha.
  11. The page “Nkhata Bay, 14 October 2026” has been merged into this one: it was the same fire.
  12. Area: 6,072 → 6,272 ha.
  13. Area: 5,321 → 6,072 ha.
  14. Area: 2,364 → 5,321 ha.
  15. Area: 2,091 → 2,364 ha.
  16. Area: 1,322 → 2,091 ha.
  17. Mapped perimeter arrives: from ≈ 1,204 ha estimated from hotspots to 1,322 ha.
  18. Start date: 14 October 2026 → 13 October 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 4 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 20 October 2026 to 11 November 2026. 503 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.