Skip to content
worldfires
TH · Thailand · –

Mae Sariang fire, 28 March 2022 แม่สะเรียง · Mae Sariang, Sop Moei

Out · last detection 6 Apr 2022, 19:38 UTC

The fire started on 28 March 2022 in Mae Sariang, Thailand, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,561 hectares from heat detections, spread across 2 municipalities.

It is the 56th largest in Mae Hong Son Province since 2016 (of 361 with a page). The largest in Thailand in 2022, of 18.

The power measured by the satellite is low (14.8 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
3,561ha
GWIS perimeter (Copernicus)
Duration
10days
28 Mar 2022 – 6 Apr 2022
Municipalities hit
2
districts
Started on
28 Mar
2022
Heat detections
61
in a single hotspot: 15 MW
Danger at start
18
Moderate · FWI index
Average daily power
25MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 28 Mar6 Apr
6 Apr 2022

How it evolved, day by day

28 Mar 2022 · 8 MW · 3 30 Mar 2022 · 1 MW · 1 1 Apr 2022 · 53 MW · 5 2 Apr 2022 · 6 MW · 7 3 Apr 2022 · 17 MW · 11 4 Apr 2022 · 12 MW · 7 5 Apr 2022 · 21 MW · 9 6 Apr 2022 · 86 MW · 18
28 Mar 1 Apr 3 Apr 6 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
39km/h · peak gust
38%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 2.3 mm on 7 Apr.

This area had burned before

97% of the perimeter overlaps earlier fires recorded since 2016: 782 ha in 2016, 2,107 ha in 2017, 2,056 ha in 2018, 2,289 ha in 2019, 2,308 ha in 2020, 1,246 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 3,448 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.2% of the area of London (36 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Mae Sariang แม่สะเรียง where it started
    2,937 ha reached on 28 Mar
    1.1 %
  2. Sop Moei สบเมย
    36 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
28 Mar 35.5 °C 48 % 33 km/h 0.8 mm Moderate 18
29 Mar 35.2 °C 50 % 34 km/h 0.7 mm Moderate 17
30 Mar 35.0 °C 44 % 30 km/h 0.8 mm Moderate 14
31 Mar 36.1 °C 38 % 26 km/h 0.0 mm Moderate 20
1 Apr 36.1 °C 38 % 31 km/h 0.0 mm High 22
2 Apr 32.1 °C 60 % 31 km/h 2.6 mm High 22
3 Apr 31.6 °C 46 % 39 km/h 0.0 mm Moderate 15
4 Apr 33.5 °C 46 % 28 km/h 0.0 mm High 22
5 Apr 36.6 °C 41 % 20 km/h 0.0 mm High 24
6 Apr 35.8 °C 47 % 25 km/h 0.8 mm High 26
7 Apr after 32.3 °C 55 % 24 km/h 2.3 mm Moderate 15

Its twins: fires that started in the same weather

It started with an FWI of 18.3, a minimum humidity of 48% and 3 days without rain. Fires in the area that started in weather like this since 2016: 25.

FWI at the start 18.3
Minimum humidity 48 %
Days without rain 3
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Mae Sariang fire, March 2023
8,462 ha 18 days FWI 16.9 Min. humidity 48 % 5 km away, in 2023

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

12 days
median duration
1,783 ha
median area
100 %
went past 1,000 ha
6.6 mm
rain at the end (median; 6 of 25 had it)

It was 2.0 times larger than the median of its twins and lasted 10 days, against 12 days.

Only 4 of its 25 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 19 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.3 mmfirst rain
7 Aprthe day after it ended
39km/h · max. gust

It was considered over on 6 Apr, and on 7 Apr 2.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 6 of 25, with a median of 6.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 21 Mar 2022
After · 13 Apr 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 61Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Thailand

Frequently asked questions

How long did the Mae Sariang fire last?
GWIS (Copernicus) dates it between 28 March 2022 and 6 April 2022: 10 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,561 hectares (35.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Mae Sariang (2,937 ha, 1.1 %); Sop Moei (36 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 36.6 °C, humidity dropped to 38 % and gusts hit 39 km/h. The fire danger index (FWI) reached 26, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Thailand (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 25. Their median duration was 12 days and their median area 1,783 ha; 100 % went past 1,000 ha. Only 4 of its 25 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 19 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 199 · 191 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 199 · 191.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 61 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.