Skip to content
worldfires
TH · Thailand · –

Mae Sariang fire, 16 April 2016 แม่สะเรียง · Mae Sariang

Out · last detection 21 Apr 2016, 07:08 UTC

The fire started on 16 April 2016 in Mae Sariang, Thailand, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,414 hectares from heat detections, spread across a single municipality.

It is the 214th largest in Mae Hong Son Province since 2016 (of 361 with a page). Number 207 in Thailand in 2016, of 387.

The power measured by the satellite is low (12.9 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
1,414ha
GWIS perimeter (Copernicus)
Duration
6days
16 Apr 2016 – 21 Apr 2016
Municipalities hit
1
districts
Started on
16 Apr
2016
Heat detections
39
in a single hotspot: 13 MW
Danger at start
37
High · FWI index
Average daily power
22MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 16 Apr21 Apr
21 Apr 2016

How it evolved, day by day

16 Apr 2016 · 3 MW · 2 17 Apr 2016 · 35 MW · 13 18 Apr 2016 · 15 MW · 6 19 Apr 2016 · 28 MW · 9 20 Apr 2016 · 47 MW · 7 21 Apr 2016 · 3 MW · 2
16 Apr 18 Apr 20 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
38km/h · peak gust
24%lowest humidity

It had gone 47 days without rain (1 mm or more) when it started. Rain came after the fire: 1.2 mm on 29 Apr.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.9% of the area of London (14 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Mae Sariang แม่สะเรียง where it started
    1,422 ha reached on 16 Apr
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.48 ha
Residents≈ 60

Inside the perimeter there were about 0.48 hectares of built-up land and about 60 residents (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
16 Apr 38.2 °C 24 % 28 km/h 0.0 mm High 37
17 Apr 38.3 °C 25 % 24 km/h 0.0 mm High 34
18 Apr 37.5 °C 34 % 30 km/h 0.0 mm High 34
19 Apr 37.8 °C 30 % 30 km/h 0.0 mm High 35
20 Apr 38.2 °C 25 % 37 km/h 0.0 mm High 36
21 Apr 37.5 °C 25 % 38 km/h 0.0 mm Very high 40
22 Apr after 34.7 °C 32 % 43 km/h 0.1 mm Very high 39
23 Apr after 36.0 °C 34 % 43 km/h 0.0 mm Very high 39
24 Apr after 35.9 °C 34 % 37 km/h 0.0 mm High 36
25 Apr after 37.6 °C 28 % 35 km/h 0.3 mm High 36
26 Apr after 38.4 °C 26 % 27 km/h 0.0 mm High 35
27 Apr after 39.3 °C 25 % 25 km/h 0.0 mm High 38
28 Apr after 38.9 °C 30 % 27 km/h 0.5 mm High 38
29 Apr after 36.4 °C 44 % 31 km/h 1.2 mm High 22

Its twins: fires that started in the same weather

It started with an FWI of 36.9, a minimum humidity of 24% and 47 days without rain. Fires in the area that started in weather like this since 2016: 42.

FWI at the start 36.9
Minimum humidity 24 %
Days without rain 47
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Mueang Mae Hong Son fire, March 2017
5,250 ha 18 days FWI 37.2 Min. humidity 25 % 102 km away, in 2017

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

13 days
median duration
2,526 ha
median area
100 %
went past 1,000 ha
2.0 mm
rain at the end (median; 10 of 42 had it)

It stayed below its twins: 1,414 ha against a median of 2,526 ha. It lasted 6 days, against 13 days.

In 32 of 42, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.2 mmfirst rain
29 Apr8 days after it ended
38km/h · max. gust

It was considered over on 21 Apr, and on 29 Apr 1.2 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 10 of 42, with a median of 2.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 9 Apr 2016
After · 28 Apr 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 39Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Thailand

Frequently asked questions

How long did the Mae Sariang fire last?
GWIS (Copernicus) dates it between 16 April 2016 and 21 April 2016: 6 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,414 hectares (14.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Mae Sariang (1,422 ha, 0.5 %).
What was the weather like?
During the fire the temperature reached 38.3 °C, humidity dropped to 24 % and gusts hit 38 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Thailand (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 42. Their median duration was 13 days and their median area 2,526 ha; 100 % went past 1,000 ha. In 32 of 42, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 199 · 191 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 199 · 191.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 39 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.