Skip to content
worldfires
RU · Russia · –

Dovolensky District fire, April 2023 Dovolensky District, Krasnozyorsky District

Out · last detection

The fire started on in Dovolensky District, Russia, and satellites saw it burning for 2 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,840 hectares from heat detections, spread across 2 municipalities.

It is number 109 by size of the 160 fires with a page that started in Novosibirsk Oblast since 2016. Number 324 in Russia in 2023, of 450.

Burnt area
3,840ha
GWIS perimeter (Copernicus)
Duration
2days
21 Apr 2023 – 22 Apr 2023
Municipalities hit
2
districts
Started on
21 Apr
2023
Heat detections
183
in a single hotspot: 73 MW
Danger at start
12
Moderate · FWI index
Average daily power
1.2GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 21 Apr22 Apr
22 Apr 2023

How it evolved, day by day

21 Apr 2023 · 3 MW · 2 22 Apr 2023 · 2,464 MW · 181
21 Apr 22 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

13°high
37km/h · peak gust
10%lowest humidity

It had gone 6 days without rain (1 mm or more) when it started. Rain came after the fire: 2.3 mm on 26 Apr.

This area had burned before

37% of the perimeter overlaps earlier fires recorded since 2016: 527 ha in 2016, 279 ha in 2018, 490 ha in 2019, 334 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 1,416 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.4% of the area of London (38 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Dovolensky District where it started
    3,337 ha reached on 22 Apr
    0.8 %
  2. 486 ha reached on 21 Apr
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
21 Apr 9.6 °C 16 % 32 km/h 0.0 mm Moderate 12
22 Apr 12.9 °C 10 % 37 km/h 0.0 mm Moderate 18
23 Apr after 16.7 °C 20 % 47 km/h 0.0 mm High 22
24 Apr after 17.6 °C 27 % 51 km/h 0.7 mm Moderate 21
25 Apr after 11.1 °C 24 % 49 km/h 0.0 mm High 24
26 Apr after 20.9 °C 29 % 30 km/h 2.3 mm Very low 2

Its twins: fires that started in the same weather

It started with an FWI of 12.5, a minimum humidity of 16% and 6 days without rain. Fires in the area that started in weather like this since 2016: 25.

FWI at the start 12.5
Minimum humidity 16 %
Days without rain 6
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Kuybyshevsky District fire, April 2022
5,237 ha 7 days FWI 12.1 Min. humidity 16 % 185 km away, in 2022

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

7 days
median duration
5,494 ha
median area
28 %
went past 10,000 ha
2.8 mm
rain at the end (median; 22 of 25 had it)

It burned an area similar to its twins (3,840 ha against a median of 5,494 ha) and lasted 2 days, against 7 days.

In 3 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.3 mmfirst rain
26 Apr4 days after it ended
37km/h · max. gust

It was considered over on 22 Apr, and on 26 Apr 2.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 22 of 25, with a median of 2.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 14 Apr 2023
After · 29 Apr 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 21 April 2023 the air beside the fire reached 19 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak19 µg/m³
Days over the guideline0 days
PM1027 µg/m³
Optical depth0.47
20 Apr22 Apr24 Apr
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 183Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Dovolensky District fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 21 April 2023 to 22 April 2023 (2 days). The perimeter dates it from 22 April 2023 to 22 April 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,840 hectares (38.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Dovolensky District (3,337 ha, 0.8 %); Krasnozyorsky District (486 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 12.9 °C, humidity dropped to 10 % and gusts hit 37 km/h. The fire danger index (FWI) reached 18, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 25. Their median duration was 7 days and their median area 5,494 ha; 28 % went past 10,000 ha. In 3 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 22 April 2023 → 21 April 2023.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 22 April 2023 to 22 April 2023. 183 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.