Skip to content
worldfires
IN · India · –

Nawagarh fire, December 2025 Nawagarh, Pamgarh, Janjgir

Out · last detection 14 Jan 2026, 07:59 UTC

The fire started on 8 December 2025 in Nawagarh, India, and satellites saw it burning for 38 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 16,410 hectares from heat detections, spread across 4 municipalities.

Number 8 in India in 2025, of 16.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Compare with…

Suggestions: Nawagarh · 2026

Burnt area
16,410ha
GWIS perimeter (Copernicus)
Duration
38days
8 Dec 2025 – 14 Jan 2026
Municipalities hit
4
subdistricts
Started on
8 Dec
2025
Heat detections
643
in a single hotspot: 111 MW
Danger at start
25
High · FWI index
Average daily power
103MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 8 Dec14 Jan
14 Jan 2026

How it evolved, day by day

8 Dec 2025 · 12 MW · 3 10 Dec 2025 · 4 MW · 1 11 Dec 2025 · 8 MW · 2 12 Dec 2025 · 4 MW · 1 13 Dec 2025 · 4 MW · 1 14 Dec 2025 · 28 MW · 11 15 Dec 2025 · 11 MW · 2 16 Dec 2025 · 32 MW · 9 17 Dec 2025 · 76 MW · 13 18 Dec 2025 · 284 MW · 33 19 Dec 2025 · 244 MW · 40 20 Dec 2025 · 29 MW · 8 21 Dec 2025 · 44 MW · 15 22 Dec 2025 · 77 MW · 14 23 Dec 2025 · 138 MW · 29 24 Dec 2025 · 369 MW · 64 25 Dec 2025 · 535 MW · 49 26 Dec 2025 · 129 MW · 27 27 Dec 2025 · 110 MW · 21 28 Dec 2025 · 108 MW · 14 29 Dec 2025 · 177 MW · 38 30 Dec 2025 · 187 MW · 43 31 Dec 2025 · 197 MW · 38 1 Jan 2026 · 69 MW · 14 2 Jan 2026 · 55 MW · 12 3 Jan 2026 · 33 MW · 4 4 Jan 2026 · 145 MW · 33 5 Jan 2026 · 142 MW · 27 6 Jan 2026 · 46 MW · 20 7 Jan 2026 · 81 MW · 20 8 Jan 2026 · 48 MW · 10 9 Jan 2026 · 100 MW · 13 11 Jan 2026 · 31 MW · 7 13 Jan 2026 · 23 MW · 3 14 Jan 2026 · 17 MW · 4
8 Dec 16 Dec 25 Dec 30 Dec 6 Jan

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (40 passes) and with what wind. Watch the film

The weather it burned in

28°high
30km/h · peak gust
23%lowest humidity

It had gone 37 days without rain (1 mm or more) when it started.

This area had burned before

42% of the perimeter overlaps earlier fires recorded since 2016: 1,470 ha in 2016, 658 ha in 2017, 1,673 ha in 2018, 555 ha in 2019, 2,511 ha in 2020, 509 ha in 2021, 2,693 ha in 2022, 1,326 ha in 2023, 3,958 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 6,949 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 10% of the area of London (164 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Nawagarh where it started
    9,626 ha reached on 10 Dec
    25 %
  2. 4,626 ha reached on 11 Dec
    10 %
  3. 1,835 ha reached on 8 Dec
    7.0 %
  4. 566 ha reached on 16 Dec
    1.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area158 ha
Residents≈ 30,000

Inside the perimeter there were about 158 hectares of built-up land and about 30,000 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
8 Dec 27.5 °C 29 % 20 km/h 0.0 mm High 25
9 Dec 27.9 °C 30 % 19 km/h 0.0 mm High 26
10 Dec 27.3 °C 26 % 18 km/h 0.0 mm High 25
11 Dec 27.5 °C 28 % 19 km/h 0.0 mm High 26
12 Dec 27.0 °C 30 % 17 km/h 0.0 mm High 26
13 Dec 26.4 °C 34 % 18 km/h 0.0 mm High 24
14 Dec 26.3 °C 39 % 18 km/h 0.0 mm Moderate 21
15 Dec 26.2 °C 43 % 14 km/h 0.0 mm Moderate 19
16 Dec 26.5 °C 38 % 15 km/h 0.0 mm Moderate 19
17 Dec 27.5 °C 32 % 20 km/h 0.0 mm High 22
18 Dec 26.1 °C 36 % 19 km/h 0.0 mm High 21
19 Dec 24.2 °C 42 % 18 km/h 0.0 mm Moderate 20
20 Dec 24.7 °C 42 % 17 km/h 0.0 mm Moderate 19
21 Dec 24.4 °C 43 % 16 km/h 0.0 mm Moderate 18
22 Dec 24.2 °C 49 % 17 km/h 0.0 mm Moderate 16
23 Dec 25.7 °C 35 % 20 km/h 0.0 mm High 21
24 Dec 26.4 °C 38 % 23 km/h 0.0 mm High 24
25 Dec 26.1 °C 36 % 20 km/h 0.0 mm Moderate 21
26 Dec 26.0 °C 38 % 18 km/h 0.0 mm High 22
27 Dec 25.4 °C 40 % 22 km/h 0.0 mm High 24
28 Dec 25.5 °C 36 % 19 km/h 0.0 mm High 23
29 Dec 25.9 °C 33 % 18 km/h 0.0 mm High 22
30 Dec 27.4 °C 33 % 19 km/h 0.0 mm High 25
31 Dec 27.1 °C 33 % 14 km/h 0.0 mm High 22
1 Jan 27.0 °C 35 % 16 km/h 0.0 mm High 23
2 Jan 27.3 °C 39 % 16 km/h 0.0 mm Moderate 21
3 Jan 25.8 °C 48 % 19 km/h 0.0 mm Moderate 21
4 Jan 25.1 °C 52 % 21 km/h 0.0 mm Moderate 19
5 Jan 23.7 °C 43 % 23 km/h 0.0 mm High 21
6 Jan 24.6 °C 32 % 22 km/h 0.0 mm High 22
7 Jan 26.1 °C 26 % 17 km/h 0.0 mm High 24
8 Jan 25.5 °C 26 % 18 km/h 0.0 mm High 24
9 Jan 25.6 °C 23 % 26 km/h 0.0 mm High 31
10 Jan 25.6 °C 28 % 19 km/h 0.0 mm High 29
11 Jan 26.9 °C 25 % 23 km/h 0.0 mm High 34
12 Jan 26.7 °C 28 % 20 km/h 0.0 mm High 32
13 Jan 26.6 °C 32 % 30 km/h 0.0 mm High 38
14 Jan 26.2 °C 37 % 21 km/h 0.0 mm High 30
15 Jan after 25.6 °C 31 % 27 km/h 0.0 mm High 34
16 Jan after 26.3 °C 29 % 19 km/h 0.0 mm High 28
17 Jan after 28.1 °C 23 % 19 km/h 0.0 mm High 31
18 Jan after 28.7 °C 26 % 16 km/h 0.0 mm High 26
19 Jan after 29.5 °C 29 % 14 km/h 0.0 mm High 28
20 Jan after 29.5 °C 30 % 15 km/h 0.0 mm High 27
21 Jan after 28.5 °C 35 % 20 km/h 0.0 mm High 28
22 Jan after 28.7 °C 28 % 17 km/h 0.0 mm High 24
23 Jan after 28.3 °C 26 % 22 km/h 0.0 mm High 32
24 Jan after 27.7 °C 27 % 19 km/h 0.0 mm High 28

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 1 Dec 2025
After · 21 Jan 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 15 December 2025 the air beside the fire reached 184 µg/m³ of PM2.5. That day averaged 126: 8.4 times the WHO daily guideline (15).

PM2.5 peak184 µg/m³
Days over the guideline29 days
PM10192 µg/m³
Optical depth1.46
13 Dec19 Dec25 Dec31 Dec6 Jan
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 643Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in India

Frequently asked questions

How long did the Nawagarh fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 8 December 2025 to 14 January 2026 (38 days). The perimeter dates it from 15 December 2025 to 7 January 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 16,410 hectares (164.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 4 municipalities: Nawagarh (9,626 ha, 25 %); Pamgarh (4,626 ha, 10 %); Janjgir (1,835 ha, 7.0 %); Akaltara (566 ha, 1.4 %).
What was the weather like?
During the fire the temperature reached 27.9 °C, humidity dropped to 23 % and gusts hit 30 km/h. The fire danger index (FWI) reached 38, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of India (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 7 January 2026 → 14 January 2026.
  2. Start date: 15 December 2025 → 8 December 2025.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 15 December 2025 to 7 January 2026. 643 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.