Kéméné Tambo fire, 11 October 2026 Kéméné Tambo, Falémé, Same Diomboma
The fire started on 11 October 2026 in Kéméné Tambo, Mali, and satellites saw it burning for 16 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,429 hectares from heat detections, spread across 3 municipalities.
It is the 8th largest in Kayes since 2016 (of 359 with a page). Number 6 in Mali in 2026, of 159.
The power measured by the satellite is low (27.8 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
Compare with…
- Burnt area
- 9,429ha
- GWIS perimeter (Copernicus)
- Duration
- 16days
- 11 Oct 2026 – 26 Oct 2026
- Municipalities hit
- 3
- communes
- Started on
- 11 Oct
- 2026
- Heat detections
- 175
- in a single hotspot: 28 MW
- Danger at start
- 1
- Very low · FWI index
- Average daily power
- 90MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 0 days without rain (1 mm or more) when it started.
This area had burned before
38% of the perimeter overlaps earlier fires recorded since 2016: 605 ha in 2016, 1,302 ha in 2017, 806 ha in 2019, 532 ha in 2022, 569 ha in 2024, 621 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 3,582 ha that had burned before.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Kéméné Tambo where it started8,274 ha reached on 11 Oct15 %
-
919 ha reached on 12 Oct1.3 %
-
289 ha reached on 17 Oct0.4 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2025Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 11 Oct | 32.0 °C | 52 % | 27 km/h | 0.7 mm | Very low 1 |
| 12 Oct | 35.1 °C | 40 % | 28 km/h | 0.0 mm | Low 7 |
| 13 Oct | 35.6 °C | 36 % | 32 km/h | 0.0 mm | Moderate 11 |
| 14 Oct | 35.6 °C | 30 % | 27 km/h | 0.0 mm | Moderate 13 |
| 15 Oct | 36.1 °C | 29 % | 16 km/h | 0.0 mm | Moderate 13 |
| 16 Oct | 36.3 °C | 33 % | 22 km/h | 0.0 mm | Moderate 14 |
| 17 Oct | 36.3 °C | 33 % | 25 km/h | 0.5 mm | Moderate 16 |
| 18 Oct | 35.3 °C | 38 % | 28 km/h | 0.2 mm | Moderate 17 |
| 19 Oct | 35.7 °C | 38 % | 24 km/h | 2.0 mm | Low 9 |
| 20 Oct | 31.3 °C | 56 % | 19 km/h | 0.5 mm | Low 10 |
| 21 Oct | 34.5 °C | 48 % | 27 km/h | 2.5 mm | Very low 5 |
| 22 Oct | 37.7 °C | 29 % | 16 km/h | 0.0 mm | Moderate 13 |
| 23 Oct | 38.7 °C | 27 % | 20 km/h | 0.0 mm | Moderate 18 |
| 24 Oct | 37.0 °C | 39 % | 24 km/h | 0.0 mm | Moderate 19 |
| 25 Oct | 37.7 °C | 32 % | 22 km/h | 0.0 mm | Moderate 19 |
| 26 Oct | 36.8 °C | 24 % | 36 km/h | 0.0 mm | High 27 |
| 27 Oct after | 34.9 °C | 20 % | 26 km/h | 0.0 mm | High 25 |
| 28 Oct after | 34.8 °C | 19 % | 27 km/h | 0.0 mm | High 27 |
| 29 Oct after | 34.2 °C | 29 % | 20 km/h | 0.0 mm | High 23 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 16 October 2026 the air beside the fire reached 79 µg/m³ of PM2.5. That day averaged 57: 3.8 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 175Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 9,060 haFalémé 12 October 2026 · 14 days · 12 km away
- 6,843 haKéméné TamboOctober 2025 · 25 days · 12 km away
- 5,889 haSame Diomboma13 October 2026 · 6 days · 20 km away
- 5,660 haKiniéba1 November 2025 · 6 days · 28 km away
- 6,275 haSame Diomboma 13 October 2026 · 14 days · 32 km away
- 6,253 haKiniéba27 October 2022 · 16 days · 33 km away
Frequently asked questions
- How long did the Kéméné Tambo fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 11 October 2026 to 26 October 2026 (16 days). The perimeter dates it from 12 October 2026 to 19 October 2026.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,429 hectares (94.3 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 3 municipalities: Kéméné Tambo (8,274 ha, 15 %); Falémé (919 ha, 1.3 %); Same Diomboma (289 ha, 0.4 %).
- Is the Kéméné Tambo fire still active?
- No fire detections since 27 Oct 2026, 14:50 UTC. A lack of detections is not an official extinction.
- What was the weather like?
- During the fire the temperature reached 38.7 °C, humidity dropped to 24 % and gusts hit 36 km/h. The fire danger index (FWI) reached 27, class High.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mali (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
- Last day with fire: 23 October 2026 → 26 October 2026.
- Name: Falémé → Kéméné Tambo.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 12 October 2026 to 19 October 2026. 175 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.