Ciudad del Maíz fire, April 2022
Ciudad del Maíz, El Naranjo
Out · last detection 14 Apr 2022, 08:37 UTC
The fire started on 1 April 2022 in Ciudad del Maíz, Mexico, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,835 hectares from heat detections, spread across 2 municipalities. According to CONAFOR, the largest of the 3 recorded fires was detected on 31 March 2022 and declared extinguished on 16 April 2022.
It is the 8th largest in San Luis Potosí since 2016 (of 15 with a page). Number 49 in Mexico in 2022, of 232.
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings ›
Weather during the fire
model
35.8°C · 17% RH
High of 35.8 °C and minimum humidity of 17% on 6 April 2022; gusts of 52 km/h on 5 April 2022.
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
ⓘThis page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
· reconstructedweather
Weather and FWI computed from the ERA5 reanalysis
· reconstructedofficial
Matched with the official CONAFOR record
Matches: 3,369 ha in the official record (records: 3).
log
Last day with fire: 14 April 2022 → 13 April 2022.
A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020
Built-up area< 0.1ha
Residents< 20
Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
According to CONAFOR, 3 fires started inside this perimeter on these dates, totalling 3,369 ha (the satellite measured 3,835 ha).
CONAFOR records each fire that started at a different time or place separately; the satellite sees a single burned area, so this page groups them together. The numbers on the map show where each one started.
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
Day
High
Min. humidity
Peak gust
Rain
Danger (FWI)
1 Apr
27.0 °C
47 %
37 km/h
0.0 mm
Moderate 20
2 Apr
28.3 °C
51 %
42 km/h
0.0 mm
Moderate 21
3 Apr
29.1 °C
51 %
43 km/h
0.2 mm
Moderate 15
4 Apr
32.9 °C
35 %
36 km/h
0.0 mm
Moderate 17
5 Apr
35.3 °C
16 %
52 km/h
0.0 mm
Very high 48
6 Apr
35.8 °C
17 %
38 km/h
0.0 mm
Very high 48
7 Apr
24.0 °C
33 %
49 km/h
0.2 mm
High 34
8 Apr
21.9 °C
44 %
45 km/h
0.7 mm
High 24
9 Apr
23.8 °C
50 %
43 km/h
2.0 mm
Low 8
10 Apr
30.3 °C
35 %
34 km/h
0.4 mm
Moderate 14
11 Apr
35.5 °C
24 %
43 km/h
0.0 mm
Very high 41
12 Apr
33.9 °C
30 %
31 km/h
0.0 mm
High 27
13 Apr
35.2 °C
21 %
40 km/h
0.0 mm
Very high 39
14 Apr after
30.5 °C
42 %
47 km/h
0.0 mm
High 32
15 Apr after
32.1 °C
50 %
38 km/h
0.1 mm
Moderate 19
16 Apr after
32.6 °C
49 %
41 km/h
0.0 mm
Moderate 19
17 Apr after
31.4 °C
54 %
40 km/h
0.0 mm
High 22
18 Apr after
29.0 °C
54 %
55 km/h
0.6 mm
High 29
19 Apr after
25.8 °C
54 %
44 km/h
0.8 mm
Moderate 21
20 Apr after
30.3 °C
50 %
47 km/h
0.6 mm
Moderate 13
21 Apr after
27.6 °C
65 %
47 km/h
10.3 mm
Low 9
Its twins: fires that started in the same weather
It started with an FWI of 19.9, a minimum humidity of 47% and 22 days without rain. Fires in the area that started in weather like this since 2016: 5.
FWI at the start19.9
Minimum humidity47 %
Days without rain22
this firechosen twinsrest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Ciudad del Maíz fire, April 2022
3,835 ha13 daysFWI 19.9Min. humidity 47 %
El Naranjo fire, March 2025
2,112 ha9 daysFWI 21.1Min. humidity 39 %40 km away, in 2025
First rain (1 mm or more) after it ended: 7.5 mm on 26 Mar.
Fires in the area that started in similar weather: 5. With fewer than 15 we give no figures: they would be more noise than signal.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
10.3 mmfirst rain
21 Apr8 days after it ended
52km/h · max. gust
It was considered over on 13 Apr, and on 21 Apr 10.3 mm fell. We do not know whether the rain or the firefighters put it out.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
Same area: fires that have already ended, less than 250 km from this one, since 2016.
Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
They are sorted by similarity, and the outlines of the first five are drawn.
GWIS (Copernicus) dates it between 1 April 2022 and 13 April 2022: 13 days between the first and last heat detection of the perimeter. According to CONAFOR, the largest of the 3 recorded fires was detected on 31 March 2022 and declared extinguished on 16 April 2022.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,835 hectares (38.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Ciudad del Maíz (3,668 ha, 1.2 %); El Naranjo (184 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 35.8 °C, humidity dropped to 16 % and gusts hit 52 km/h. The fire danger index (FWI) reached 48, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
⚑Report an errorHow we know this›
Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
Compared with CONAFOR: 3,369 official ha against 3,835 ha of perimeter; they agree within 25%.
Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.