Skip to content
worldfires
AO · Angola · –

Capenda-Camulemba fire, 3 August 2016 Capenda-Camulemba

Out · last detection 12 Aug 2016, 11:46 UTC

The fire started on 3 August 2016 in Capenda-Camulemba, Angola, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 11,520 hectares from heat detections, spread across a single municipality.

It is the 31th largest in Lunda Norte since 2016 (of 297 with a page). Number 21 in Angola in 2016, of 138.

Burnt area
11,520ha
GWIS perimeter (Copernicus)
Duration
9days
3 Aug 2016 – 11 Aug 2016
Municipalities hit
1
municipalities
Started on
3 Aug
2016
Heat detections
407
in a single hotspot: 0 MW
Danger at start
60
Extreme · FWI index
Average daily power
304MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Aug11 Aug
12 Aug 2016

How it evolved, day by day

3 Aug 2016 · 11 MW · 3 4 Aug 2016 · 296 MW · 78 5 Aug 2016 · 1,178 MW · 104 6 Aug 2016 · 596 MW · 44 7 Aug 2016 · 128 MW · 29 8 Aug 2016 · 39 MW · 16 9 Aug 2016 · 214 MW · 47 10 Aug 2016 · 194 MW · 39 11 Aug 2016 · 87 MW · 16 12 Aug 2016 · 298 MW · 31
3 Aug 5 Aug 7 Aug 9 Aug 11 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
53km/h · peak gust
10%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 7.3% of the area of London (115 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Capenda-Camulemba where it started
    11,597 ha
    1.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.11 ha
Residents≈ 40

Inside the perimeter there were about 0.11 hectares of built-up land and about 40 residents (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 68 % of the area in Angola Very dry air: 40 % of the area in Angola 60 days without rain: 84 % of the area in Angola

Day High Min. humidity Peak gust Rain Danger (FWI)
3 Aug 31.4 °C 14 % 46 km/h 0.0 mm Extreme 60
4 Aug 31.7 °C 10 % 48 km/h 0.0 mm Very extreme 70
5 Aug 29.3 °C 15 % 53 km/h 0.0 mm Very extreme 72
6 Aug 28.5 °C 15 % 48 km/h 0.0 mm Extreme 66
7 Aug 30.0 °C 14 % 46 km/h 0.0 mm Extreme 57
8 Aug 29.3 °C 16 % 45 km/h 0.0 mm Extreme 58
9 Aug 29.8 °C 19 % 38 km/h 0.0 mm Extreme 54
10 Aug 30.1 °C 21 % 49 km/h 0.0 mm Extreme 65
11 Aug 30.1 °C 21 % 43 km/h 0.0 mm Extreme 55
12 Aug after 31.0 °C 19 % 33 km/h 0.0 mm Extreme 51
13 Aug after 31.8 °C 17 % 19 km/h 0.0 mm Very high 44
14 Aug after 31.4 °C 18 % 26 km/h 0.0 mm Very high 50
15 Aug after 31.3 °C 21 % 34 km/h 0.0 mm Extreme 55
16 Aug after 32.0 °C 22 % 28 km/h 0.0 mm Extreme 54
17 Aug after 32.5 °C 16 % 49 km/h 0.0 mm Extreme 64
18 Aug after 32.2 °C 15 % 41 km/h 0.0 mm Extreme 62
19 Aug after 32.2 °C 17 % 20 km/h 0.0 mm Very high 45
20 Aug after 31.1 °C 22 % 26 km/h 0.0 mm Very high 42
21 Aug after 31.4 °C 22 % 26 km/h 0.0 mm Very high 41

Its twins: fires that started in the same weather

It started with an FWI of 59.6, a minimum humidity of 14% and more than two months without rain. Fires in the area that started in weather like this since 2016: 17.

FWI at the start 59.6
Minimum humidity 14 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Cacolo fire, August 2018
6,115 ha 9 days FWI 58.6 Min. humidity 15 % 77 km away, in 2018

First rain (1 mm or more) after it ended: 2.4 mm on 5 Sept.

What happened to them

10 days
median duration
5,986 ha
median area
12 %
went past 10,000 ha
3.4 mm
rain at the end (median; 4 of 17 had it)

It was 1.9 times larger than the median of its twins and lasted 9 days, against 10 days.

Only 2 of its 17 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 13 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
53km/h · max. gust

It was considered over on 11 Aug, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 4 of 17, with a median of 3.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 27 Jul 2016
After · 18 Aug 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 0Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Angola

Frequently asked questions

How long did the Capenda-Camulemba fire last?
GWIS (Copernicus) dates it between 3 August 2016 and 11 August 2016: 9 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 11,520 hectares (115.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Capenda-Camulemba (11,597 ha, 1.2 %).
What was the weather like?
During the fire the temperature reached 31.7 °C, humidity dropped to 10 % and gusts hit 53 km/h. The fire danger index (FWI) reached 72, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Angola (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 17. Their median duration was 10 days and their median area 5,986 ha; 12 % went past 10,000 ha. Only 2 of its 17 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 13 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 4 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 18 August 2016 → 11 August 2016.
  2. Start date: 28 July 2016 → 3 August 2016.
  3. Last day with fire: 11 August 2016 → 18 August 2016.
  4. Start date: 3 August 2016 → 28 July 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.